parting out ranger and exploreer
parting out 86 ranger- dash, coulmn, wiring, two 5spd trans (one has bad 1st gear), a spare manual t-case, 2.9 liter engine, 2 radiators (one new autozone used 6 weeks and other unknown used...both with shrouds), ac/heater box, front split bench, pedal assembly, used 3" body lift, computer, and maybe more let me know and i'll tell you if it's availible...
parting out 92 explorer, pulled motor, trans, front seats, wiring, computer, radiator, dash, computer, rear axle and fuel tank to put into above ranger... that leaves the complete body (dent in lower rear passenger door), rear seats, front clip, both bumpers, front axle, auto t-case, auto hubs and a few other misolaniuos parts... heres the cool part... taking any reasonable offer on any part i have availible... seriously shoot me a decent offer and the part is yours.... pm me and i'll get back to you.. |
im looking for 4 aluminum rims 16" to fit a 97 explorier. do you have them?
|
rims
no no extra rims right now 15 16 or otherwise plus 16s are hardest to get.
|
do you have some dana 28 axles I need some asap, give me a pm if you do have some thanks
|
what parts do you need please specify then i can tell you thanks :-partybud:-huh
|
front axleshaft the passenger one. and depending on price maybe the driver side.
|
10 bucks a pice plus shipping whats your zip code and when
|
i'll pay now and take all of the front ones. do you have pics. my cell. 413-627-six seven seven nine. please call as soon as you have a chance
|
sorry stupid cell phone didn't show last post.
|
do you still have the bodylift if so send me a pm
|
hows the trans for the explorer? i have an 96 4.0 that needs a trans
|
pm sent in regards to the bodylift and as for the tranny 2 points...one the 92 trans and 96 are differant... second after i change the filter it goes in the ranger project along with the 4.0....can get you one locally from my wrecking yard hookup...
|
i need the fuel return line for the pressuse regulator to the lines near frame rail, they have high pressuse fittings on them.
thanks |
have the set from the 86 ranger but not from the explorer... can get them from the llocal wreckers though...
|
Hi,
I am looking for the composit rubber drive shaft coupler for my 88 ranger. Got one of these left? Thanks |
sorry so late, been out truckin, all extra parts scrapped
|
Hi,
Saw your reply. Could you send me a picture of your coupler & a price. Thanks, RangerSkip |
Originally Posted by OrFordGuy
(Post 9831283)
no no extra rims right now 15 16 or otherwise plus 16s are hardest to get.
|
that rangers been scrapped and i no longer have or need parts thanks for lookin,,.
|
86 Ranger AC/Heater Box?
Would you still happen to have the AC/Heater box for the 1986 Ranger?
|
ASAP 1986 Ford ranget wiring
Im needing ur wiring harnesses of the ol ranger im in tx 77656 need them ASAP plz cal 409 - five five four - 600 four plz and thank you in advance
|
All times are GMT -5. The time now is 06:53 PM. |
© 2024 MH Sub I, LLC dba Internet Brands