![]() |
Seeking to buy5152Ford Pickup 7tooth Grill
I am looking for a5152 Ford Pickup 7toothgrill to purchase from anyone out there who knows the whereabouts of any available. Sicillianboy423
|
Just take a regular grille and add teeth to it.
|
Originally Posted by fifty-two_f1
(Post 10371291)
I also have an 8BA flathead V8 that is complete. I pulled the heads to check for cracks and could not find any. I used 400 grit in between the valves and cylinder walls where they like to crack but did not see anything. It is not stuck. It is standard bore. It had clean oil in it. It came out of a 1950 truck. I have an extra set of heads and an extra crank for it. It needs to go. I also have a 226 flat 6 block and a 215 6 that is stuck. MAKE ME AN OFFER!!!
Thanks! |
private message sent!!!
|
Bench Seat
Do you still have the bench seat for sale?
|
I do. Send me an email to jrkeesling@gmail.com and I will send you photos.
|
Hello! I am new to this site--just joined today--we have a 1950 Ford F-1--we are restoring--we are looking for the door panel cover plates--some call them inspection plates--we have checked places like LMC--etc--and they are apparently not making reproductions of this part--and we do need! please feel free to contact me if you may have some you would like to sell--thank you so very much!
|
Send me an email at jrkeesling@gmail.com I do have them!
|
thanks for the message--replied!
|
fifty-twof1: if I could locate this grill it would help immensely. thank you for the advise.
|
|
Hi, just joined. Looking for 51-52 front and rear fenders. Any chance you have? Thanks!
|
I have one front with lower, but no rears. Those are tough to come by! If you are interested, contact me. Thanks!
|
I'm seeking a driver's side window that rolls up in the door for a 1951 F1.
Great if the anti-rattle seals are available, too. Thank you, Doug |
Do you need just the glass? I do not have any good anti rattle seals. it is best to purchase those new.
|
I'd like to buy the glass yes. Saw the panes for 39.95 on lmc truck.
I will buy the anti rattle seals elsewhere. Are yours clean and unscratched? Thank you, Doug |
Originally Posted by DW SD
(Post 14634089)
I'm seeking a driver's side window that rolls up in the door for a 1951 F1.
Great if the anti-rattle seals are available, too. Thank you, Doug Pigeon wings $95.00 with the etched logo The process goes quicker if you call 'em direct. The $74 includes S&H, forgot to add this. Good luck, Douglas |
Originally Posted by DW SD
(Post 14635322)
I'd like to buy the glass yes. Saw the panes for 39.95 on lmc truck.
I will buy the anti rattle seals elsewhere. Are yours clean and unscratched? Thank you, Doug Honestly, If you can get a new one for 40, go that route. Original glass is never perfect and generally always has deterioration between the panes. It may not have the ford "bug" on it, but I think someone sells that etching kit. |
Originally Posted by 230thdratsab
(Post 14635809)
If you desire an original piece of glass with the Ford Safety Glass etched logo, $74.00 at Welcome to Classic Auto Supply
Pigeon wings $95.00 with the etched logo The process goes quicker if you call 'em direct. The $74 includes S&H, forgot to add this. Good luck, Douglas |
Fender's Needed
Looking for the front fender's for a 1951 F2, Any help will be appreciated.
got the old 1950 Ford F2 all done, Now onto doing a 1951 F2.. Fun Fun!! Gonna post pictures of the 1950 F2 that was restored here in a day or 2. |
I've got a set, What is your email?
|
Originally Posted by fifty-two_f1
(Post 14645801)
I've got a set, What is your email?
Sent ya a message Thanks Vince |
thanks for the info!
I think I'll just order new glass from LCM. Doug |
Not a problem, I am not familiar with LMC's glass, but make sure its the double pane instead of single. If its single, it will be thinner than the original and wont fit as snug in your anti rattle felt (but it will work just fine).
|
good tip!
Thanks, Doug |
Is the 8BA V8 still on the block?
Thanks |
PM me if you have any full length running boards for a 51 F1. I am looking for a F1 right rear fender as well.
|
do you still have the ash tray for the 53 f100? if so how much? you can email me at gw65@gwtc.net or call me at 605-209-0888. thanks, george.
|
Sorry guys, its been a while since I've been on here.
Not sure what you're asking Daddybiss. mustangmike, PM sent. fifty2f1, I sent you an email. Thanks! |
Hey fifty-2f1, I have a holley 847 7HT carb from my 48 226 and I need a choke lever and the arm that holds the cable. Could use an ashtray for same if you still have one. P M me if you can.
|
toby tough.....i think i have some parts for the holley. i sold my 50 ashtray and now i need a 53 fl00 ashtray. please email me and i will send you pics, i just can't deal with this pm thing and not being able to post pics here. my email gw65atgwtcdotnet . thanks, george...
|
Any luck finding a 51 F1 right rear fender?
|
I sent you a text.
|
Do you still have the stubby running boards? Are they the type like on an F4-F6? If so let me know, I need at least the driver side and would buy both if you still have them.
|
Yes I do, Send me an email at jrkeesling@gmail.com
|
looking for a 51 glove box button
|
Mad Mel,
Are you looking for a lock or something else? |
I believe it is just a crome push button non locking, I just have a round hole in the glove box door. Thanks Mel
|
Mel, It is for a lock cylinder. The standard cabs did not have them. I assume you must have a 5 star cab?
|
It is a Canadian made truck, I think they just call it a deluxe cab, 5 star is a new term to me, I have been trying to find out how many were made, Ford said they would get back to me but never did. I think it might be fairly rare even the motor is stamped made in Canada.
|
All times are GMT -5. The time now is 11:58 PM. |
© 2024 MH Sub I, LLC dba Internet Brands