Originally Posted by 77mud
(Post 12077649)
then why complain?
Originally Posted by alpha/omega
(Post 12077716)
Dear Paul,
The seats are apparently 2" too tall for his liking and wants to do away with the 1" tall sliders. Thats a total of 3" too high on the driver side....bear in mind the front stubs/posts are only 1 1/2" tall. Your design has basically failed me. :D <3 Kris A) I told you to get him over there before we did it B) Fwak him, does he want to sit on the floor? C) The tube is 1.5 and the stub is 1.5 ... he wants the seats on the floor. He won't be able to see over the dash. <3 Paul |
Maybe he isn't a midget
|
Originally Posted by captain p4
(Post 12077999)
To make Kris feel like an a hole.
I would never feel like an a-hole for causing you pain...bisch. BTW, did you use my welder last week? A) I told you to get him over there before we did it - I agree but he was over 1000 miles away at the time so I used our combined similar height to make a good measurement for seat height. I did not account for gunt as we do not have one. B) Fwak him, does he want to sit on the floor? Apparently C) The tube is 1.5 and the stub is 1.5 ... he wants the seats on the floor. He won't be able to see over the dash. Probably not <3 Paul |
You didn't tell me he was a fatty
|
Me seat in the 77 is mounted to the floor board and my helmet still comes real close to the roof
|
Originally Posted by 77mud
(Post 12081713)
Me seat in the 77 is mounted to the floor board and my helmet still comes real close to the roof
Maybe so but not everyone licks windows. |
Originally Posted by hav24wheel
(Post 12081803)
Maybe so but not everyone licks windows.
|
Originally Posted by hav24wheel
(Post 12081803)
Maybe so but not everyone licks windows.
|
Some pics...
http://i253.photobucket.com/albums/h...1-58-05_24.jpg http://i253.photobucket.com/albums/h...-29-33_166.jpg http://i253.photobucket.com/albums/h...-34-29_253.jpg http://i253.photobucket.com/albums/h...-34-47_441.jpg 2500 stall converter http://i253.photobucket.com/albums/h...-44-48_212.jpg I put it in all by myself :D http://i253.photobucket.com/albums/h...-53-06_902.jpg Tranny cooler. Probably looks much different than the trannys you guys are used to. http://i253.photobucket.com/albums/h...-01-37_549.jpg http://i253.photobucket.com/albums/h...-53-18_857.jpg Painted da' mota red http://i253.photobucket.com/albums/h...-58-03_215.jpg 3g Alternator http://i253.photobucket.com/albums/h...-12-54_901.jpg Quick release for the steering wheel. http://i253.photobucket.com/albums/h...-44-11_300.jpg |
Nice! You finally got yer azz motivated without me there. :flip
|
I believe theres a ghey joke to be made there....
|
Originally Posted by 77mud
(Post 12119871)
I believe theres a ghey joke to be made there....
|
What you did there? I sees it!
|
Mo' junque.
Made a little bracket to help hold the 3g alternator. Im using a piece of 3/8 all thread back to a hole in the 302 block. On 460s the holes at the front are 7/16" so I havent needed to do this before. http://i253.photobucket.com/albums/h...-21-54_433.jpg 6ga wire and 175 amp mega fuse http://i253.photobucket.com/albums/h...-25-34_231.jpg Made a little bracket for the MSD 6al digital. The center tunnel didnt really offer an easy mounting position otherwise. http://i253.photobucket.com/albums/h...-52-24_563.jpg http://i253.photobucket.com/albums/h...9-54-58_38.jpg http://i253.photobucket.com/albums/h...-53-05_213.jpg http://i253.photobucket.com/albums/h...-26-20_869.jpg Not sure how many of you have ever seen the Ballistic forged poly bushings in person but DAMN!! These things are nice - especially for ~$50 ea including the jamb nut and tube adapter. Im using the 1" shank 5/8" through bolt for the front link in a set of ladder type traction bars. At the rear Im cutting 3" pieces of 2x.250 DOM and using poly Chebby leaf spring bushings to make my own deal. http://i253.photobucket.com/albums/h...-45-55_961.jpg http://i253.photobucket.com/albums/h...-02-05_859.jpg |
Looks good so far.
Yet again, Them r some beefy bushings. |
All times are GMT -5. The time now is 06:28 PM. |
© 2024 MH Sub I, LLC dba Internet Brands