You can see where the A pillar tag was, but it is gone. That's why I was hoping the VIN would be more definitive.

vin decode
 

hello, again I apologize for the inconvenience.
but there's nothing else to do to get the information fast?
there is no agency that can do these practices?
I'm sorry, but there is only you who is available to help me.
thanks, and Merry Christmas

hi. seems you know all. please help decode. I just got 1967 econoline.
vin tag:
090 E101 287 C 01
4350 089 3800 372210
trim tag:
8-186 703641
10-1 G-1
SPASS ST MIR-L BUMP
REF-T & TS-3
37-2210
trim tag was loose in glove box& may not be for this vehicle
THANKS FOR YOUR HELP!

VIN help 60's F100 Ford Truck
 

Hi, I have an old F100 that I just bought, no title, but the door panel plate has a vin of "F10BR567080". I certainly can find no other vin plate on this vehicle & am trying to figure out the year, mostly. any help would be greatly appreciated! Thank you in advance.

VIN Decode help please
 

:-huhHi! I recently bought a Ford Pickup, definitely a project, & I can only locate 1 vin plate on the driver's side door. Can anyone help me decode, please? MVD here in AZ is absolutely no help, & I have no title. It's F10BR567080.

Any help would be really appreciated. I've googled online but get mixed/conflicting information. Thank you!

I'll be at the Fabulous Fords Forever show at Knott's Berry Farm in April. Never been there before but hear it's a great show.

Try posting this in the 60's Ford truck forum. Might get better help there.

Since the subject was already brought up I'll post it here

Picked up this baby from a car farmer down in King City. He didn't speak english and I no hablo Espanno. It was a real good time. Been loving this thing.

So I would like to ask to have this ford door tag translated for me, an I'll check the dog housing lip an any other places for vin's tomorrow.

E14FHA59777

then the rivet blocks at least one decimal that looks like a 0 or a D or O..(X)
(X)90 E142 389 C 12
0 4930 089 3800 720163

Thanks in advance!

E14 = Econoline (E142) H/D Cargo Van.

F = 170 1V I-6.

H = Lorain OH Assembly Plant.

A59777 = 1967, assembled December 1966.

90" Wheelbase.

COLOR: Blank.*

E142 = Econoline Heavy Duty Cargo Van with R. H. body side doors (less windows) / 4,930 lbs. GVWR

389: 3 = Medium Green Crush Vinyl & Medium Green Match Stick Pattern Vinyl / 89 = Econoline (E142) H/D Cargo Van.

C = Ford type 3.03 3 Speed Manual all Syncromesh Transmission.

12 = Ford WCR-M 9" Rear Axle / 4.11-1 / non Limited Slip / 3,050 lb. Rear Axle Capacity.

4,930 lbs. Gross Vehicle Weight Rating.

89 net HP @ 3,800 RPM

720163:

72 = San Jose (NorCal) Ford District Sales Office, where the original selling dealer ordered the Econoline from.

0163 = Domestic Special Order number. The Econoline was ordered special by the original purchaser, not "bought off the lot."

* When there is no COLOR code, the vehicle is painted a non standard color per the original purchasers request. When this occurres, the vehicle is a Domestic Special Order.

Wow, I am forever grateful.

Bill, you seem to be the man to come to. I need some help with mine as well.

VIN-E14th503248 WB-090 Color-M Model-E144 Body-589 Trans-A Axel-01

Thanks for any help you can give to a newbie. Dan

Dan

It looks like that one is already in the big Econo database, including the last line of data that you did not enter.

Here is a direct link to your Econoline data.

Econoline ID

Econoline ID

Welcome to FTE

E14 = E100 Van.

T = 170 1V I-6.

H = Lorain OH Assembly Plant.

503248 = 1964, assembled February 1964.

90" Wheelbase.

M = Wimbledon White.

E144 = E100 Van, 4,350 lb. GVWR

589: 5 = Red Crush Vinyl & Red Stitch Pattern Vinyl / 89 = Econoline Van Body Style.

A = Ford type 3.03 3 Speed Manual all Syncromesh Transmission.

01 = Ford WCC-A Rear Axle / 3.50-1 / 2,300 lb. Rear Axle Capacity.

4,350 lbs. Gross Vehicle Weight Rating.

Cert. net HP omitted.

RPM omitted.

DSO omitted.

If the van had a 144 engine then it would have a WCC-A rear axle with a 7" ring gear. However this van has a 170 engine, which would mate with a WCC-D or WCC-M rear axle with a 7.25" ring gear. Would they have put a 7.25" ring gear in the WCC-A axle?

Here's the info straight from the 1964/72 Ford Truck Parts Catalog:

Text Section 40.1, page 5 ~ 1964/65 Warranty or Rating Plate Code Chart: 01 (1964) Ford WCC-A / 3.50-1 / Parts list #89.

There is no WCC-M listed until 1966 (page 13): 01 = WCC-M / 3.50-1 / Parts list #89.

Text, Section 40A, page 24: Part list #89: C3UZ-4010-C .. Axle Housing, use with 144 engine & 7" ring gear // C3UZ-4010-G .. Axle Housing, use with 170 engine and 7 1/4" ring gear.

There is no WCC-D listed, period. Not for 1964/65, nor for 1966/67.

Thanks

I was confused by the chart on page 1 of section 40.3 that shows a 7" ring gear for the WCC-A axle. I guess this chart is incorrect.

1961-67 Econoline Van Vin Decoder
 

New to FTE and looking for some help on decoding my vin so I can be certain of its specs before I start the restoration process. I've tried to do the leg work and decode it myself but have come up short when it comes to certain parts. It'd be much appreciated if someone could help me decode as much as possible. Thanks in advance! Here's the digits (pulled from the plate on the driver's door):

E14TH522274
090 E145 489 <---(MIGHT BE H89) A03
4850 85 3600 710735

Find your data-plate decode here:
Econoline ID

Can you tell what color it was originally? Your van was a special order, and the paint color is not listed.

Emil

Welcome to FTE

E14 = E100 Van.

T = 170 1V I-6.

H = Lorain OH Assembly Plant.

522274 = 1964, assembled March 1964.

90" Wheelbase.

COLOR blank.*

E145 = E100 Van, 4,850 lbs. GVWR

489: 4 = Light Beige Crush Vinyl & Light Beige Stitch Pattern Vinyl / 89 = E100 Van.

A = Ford type 3.03 3 Speed Manual all Syncromesh Transmission.

03 = Ford WCR Rear Axle / 4.11-1 / 2,700 lbs. Rear Axle Capacity.

4,850 lbs. Gross Vehicle Weight Rating.

85 net HP @ 3,600 RPM

710735:

71 = Los Angeles (SoCal) Ford District Sales Office, where the original selling dealer ordered the Econoline from.

0735: Domestic Special Order number. The Econoline was ordered special by the original purchaser, not "bought off the lot."

* When there is no COLOR code stamped on the Warranty Plate, the vehicle is painted a non standard color per the original purchasers order. The makes the vehicle a Domestic Special Order.

@EmilBarnabas - Thanks for the info! The color on the inside of the van, which looks like the original is a deep metallic green. Interesting to find out it was a special order!

@NumberDummy - Thanks for all the info, I really appreciate it!!! So glad to get this information and start work. Thanks again.

vin number
 

i finally started on my project, a 1965 Ford falcon Econoline (clubwagon ?) with a V8 in the dog house
I am Europe based so not near to any refferences.
Started the engine, runs on petrol as wel as LPG.
Brakes where stuck but i remove boh front brakedisks and am now looking to buy a drum to disk kit.

I am looking for the vin number
but so far i found these numbers on the edge of the doghouse
E13TH 649687
any body have some info?

The exhaust manifold has the number CGOE 9430 - F
The valve covers have 5 bolds
What engine do you think i have ? is it a 302 ?

really appriciate any help..

cheers Gusz

Welcome to FTE

1969: First year Econolines were available with a V8 (302).

It cannot be a 302 as only FE engines (352/360/390 and etc) have 5 valve cover bolts per side.

6 valve cover bolts per side: 221/260/289/302/351W

While FoMoCo installed Falcon nameplates on some of these vans, they're really Econolines.

E13 = E100 (Econoline) Deluxe Club Wagon.

T = 170 1V I-6.

H = Lorain Ohio Assembly Plant.

649687 = 1965, assembled February 1965.

Hi NumberDummy
tnx for the quick reply

the engine intake manifold says fring order 15426378
Also FoMoCo and digids 68ZE

the second digid on the manifold should/could be a 6
what does this tell me? i am sure it is a V8 :-)
Checked the images and the valve cover has 6 bolts, so is it a 302?

cheers

Too many engines have this firing order to pin it down. 6 valve covers bolts will be found on all 1962/63 221's, 1962/65 260's, 1963/68 289's, 1968/96 302's, 1969/97 351W's.

C6OE exhaust manifold casting number prefix applies to 1966, but could also apply to 1967 and thru the 1970's.

C8ZE intake manifold casting number prefix applies to 1968, but could also apply to 1969 and etc.

People love to swap parts, so attempting to pin down the actual year of the engine won't be any more successful than Operation Market-Garden was. A fiasco...where Monty met his personal Waterloo...at Arnhem.

Is it a 302? Maybe yes, maybe no. Measure the stroke to determine engine size: 289 = 2.87" / 302 = 3.00" / 351W = 3.50."