|
They've been showing previews of next week's Fast and Loud.
They have one of these tractors and matching trailer. There may have been another one in the back ground, but I didn't get a good look at it. So tune in guys. |
Does any one have any idea where I could find Aluminium 6 lug wheels or simulators for this ford, I was going to send 4 of them to Ca to the only shop I can find that will chrome them. Problem I have is now I have 10 wheels and not 4 of them are the same.
|
This is the plan going to make it a Super Duper Duty What do you think?
https://cimg6.ibsrv.net/gimg/www.for...302bdd123e.jpg |
New C series owner
Hello, I just bought this retired fire truck and in doing some research came across this forum. Good to see other folks who have an interest in these trucks. This truck has spent its entire life in a fire hall and is in amazing shape, it has 23,000 kms or 14,000 miles. My plan is to remove the pump, and most of rear body and convert it into a car hauler. https://cimg5.ibsrv.net/gimg/www.for...fb2483105.jpeg https://cimg8.ibsrv.net/gimg/www.for...3401a97d0.jpeg https://cimg9.ibsrv.net/gimg/www.for...e2c806483.jpeg |
Originally Posted by big'in
(Post 16161090)
|
That's a chevy T series. Even so it sure is interesting to look at.
|
NumberDummy ain't stupid...
https://cimg5.ibsrv.net/gimg/www.for...6c06fbae36.jpg
https://cimg3.ibsrv.net/gimg/www.for...1568624b34.jpg ...others pointed me here 'cause he's a C-cab genius. I'm a C-cab idiot who's going to get a lot smarter, hopefully not the hard way. Just bought a '69 C-750. Hoping to learn how these are decoded, as I plan to drive this from Michigan to Utah this fall. Maybe I'm the dummy.😂 |
Getting moderately smarter...
C75 = C750 F = 391 4V FT engine (should this be "FE engine"?) U = Louisville Assembly Plant F90327 = March 1969 Wheelbase = 153" J = red (official name TBD) Model = Tilt-cab, gas 4B = Black leather grain vinyl 91 = standard cab 4 = (what transmission goes here?) E2 = Eaton 16244 2-speed, 6.17/8.58, 17,500 lb. rear axle D = 7,000 lbs. Ford Rockwell/Timken front axle Been piecing info from numerous other decoded VIN's, so there may be errors. Really need the transmission code, paint color would be nice. |
FT and FE engines are based on the same block design, but have some differences that make most parts non-interchangeable.
For that long trip, consider converting your ignition to electronic via Pertronix. There are other ways that can be found here if you don't like that method. Check your fuel system. Check your gas credit cards, and look into getting one with bonus points for gas purchases that you can redeem for hotel, other travel or hemorrhoid treatment. You will accumulated a lot of points on your trip. Can't otherwise help with the decode, stand by I hope. |
Originally Posted by 85e150six4mtod
(Post 18126448)
FT and FE engines are based on the same block design, but have some differences that make most parts non-interchangeable.
For that long trip, consider converting your ignition to electronic via Pertronix. There are other ways that can be found here if you don't like that method. Check your fuel system. Check your gas credit cards, and look into getting one with bonus points for gas purchases that you can redeem for hotel, other travel or hemorrhoid treatment. You will accumulated a lot of points on your trip. Can't otherwise help with the decode, stand by I hope. I'm speculating the 391 is FT, 390 is FE, and so on with others in the engine family. |
Just bout this C550
|
| All times are GMT -5. The time now is 06:13 AM. |
© 2024 MH Sub I, LLC dba Internet Brands