Howdy, looking for a 65 tail gate that is in good shape
Originally Posted by camperspecial65
(Post 10715175)
Lots of 61-66 parts...body parts, trim mostly...heavy in 65-66 stuff...dash bezels or clusters, tail gates, door glass, switches and bezels...I also have an undrilled hood...no side trim on it ever...I also have a couple of radios(untested) original dash speakers, dash pad trim, headliner trim, etc etc...
73-9...I have a left grille insert for 73-5(?) and a left for a 76 as well(black paint around headlight area. I have a pair of 78-9 headlight doors and a complete grille shell, insert and headlight door setup...a dash pad...black...tailgate trim panels, a few pieces of race trak trim and some of the big side moldings with the vinyl cushion in it. Also have a 78-up type CC type horn pad... Theres lots more not listed so feel free to ask away... Howdy, how much you askin for a tailgate with both bottom hinges and shipping to 85534 Duncan Az? Guess its called a stylside not fleetside. Thanks chet Im open to trades for NOS 65-6 stuff or NOS 79-91 Crown Vic wagon trim One thing I am in dire need...NOS LB side moldings...also a mint firewall insulation pad. Thanks chet |
Howdy, where can I also get an OEM blue steering wheel that is in good shape?, mine is pretty much a metal ring with plastic chunks stuck to it!
Thank you Chet |
I MIGHT have a blue wheel...I do have a mint black wheel...
On the tailgates, are you looking for driver quality or are you doing a show truck ? - cs65 |
Howdy, the blue would match the rest of the interior but nice conditoin is key also.
How much are you asking for the black wheel? The tail gate, I would like to be undented as much as possible especially on the top edge and the face, a couple divets on the inside is not too bad but a nice gate is better. I have been waiting on a guy who has a nice gate to get back with me. If things fall through, I would be interested in dealing with you. what do you want for your gates? do you have a real nice one? Thanks for your time! Chet |
Email sent to you wheels1957....
- cs65 |
Short bed and tailgate available? Not just to drive, but to show.
|
Nothing for ya there Keith except tie down hooks which I have a few of.
- cs65 |
Looking for an automatic shift lever (column shift 73-79). Do you happen to have one?
How about a dashpad for the same? Still have the one you listed a few months back? Thanks, jim |
I do have a black dashpad for 73-79 F series...as well as Jade green door panels for whoevers in need...
I will look for the gear shift lever. - cs65 |
Thanks for checking, CS65 -
What kind of shape is the dashpad in? I'm ok with faded, just want one that's not cracked, split or warped. Let me know if you can find the shifter. Jim |
The pad has no cracks.. If you want, post a msg in my visitors section of my acct with your email address.. Click my nick will bring the options up as I recall
- cs65 |
I have a steering wheel for the 61-71 trucks...
61-64 door sill plates Custom cab door trim inside and outside as well as molding clips for 65-66 Outside moldings for 63-64 trucks dash bezels for round speedo trucks with or w/o alt/oil pressure gauges Lower dash knob trim bezel used on Custom Cab trucks 61-64 Styleside tailgate for 57-60 or 61-66 4WD trucks(except 66 F100 4WD) If theres something you need, but dont see listed, inquire within. - cs65 |
Looking for a passenger side front fender, it will be going on a 1962 Unibody
|
Tried to PM you...
Hi-
I remember you from the early years here. I took ten years off, have a new project now - swb F100. I need a heater control valve right now and more stuff later. I'm just up the road in Van BC. Hope to hear from you. Eric |
NO right fender...only left fender...
Message replied to about ghe heater valve Eric - cs65 |
All times are GMT -5. The time now is 05:18 AM. |
© 2024 MH Sub I, LLC dba Internet Brands