Ford Truck Enthusiasts Forums - View Profile: rbaruffi

rbaruffi is starting off with a positive reputation.

rbaruffi rbaruffi is offline

Freshman User

Visitor Messages

Showing Visitor Messages 1 to 3 of 3
  1. Blown 331
    09-05-2011 04:11 PM - permalink
    Blown 331
    The entire marketplace is considered the classifieds. Try becoming involved with the forum and after a little more contribution, you will be able to post in the WTB section. And welcome to the site by the way.
  2. bertha66
    05-30-2011 09:45 AM - permalink
    Robert, I got a e-mail from you asking about the headers on my 66 F100 with the GT 390. I used a set of Cyclone headers for the 66F100 4x4 with the OE 352 engine. Then I had a machine shop drill the heads to take the standard 8 bolt, up and down bolt pattern. I never seen a set of headers for the cross bolt GT heads that would fit a 4x4 truck.
  3. rbaruffi
    05-27-2011 11:48 AM - permalink
    Hey Guys,

    I have a 1974 F-100 2wd, shortbed, PS, PB with 302 and a C-4 and need help. It had a 460 and still has the huge radiator.
    I want to put in an S CODE 390 GT (14 Bolt Heads and a C-6). Here are some questions:

    1. Will the 390 bolt in where the 302 is or do I need different frame mounts ? Same with the C-6. If so, where do I find them.
    2. I'd like have a 380-400 HP. The 390 is completely disassembled. I bought a Comp Cams 280H and a Clevite 280-290 dur .510-.536 lift and windage tray. Please give me some advise on the manifold, carb and if adjustable rockers are worth it. Which cam should I use?
    3.Where can I find headers for this truck that has a 14 bolt pattern and not the 8 bolt.

    Robert in Beaufort SC

About Me

  • About rbaruffi
    Retired Soldier
    Walterboro SC
    60's and 70's Fords
    2 Letter State/Province (use "--" for outside USA/
    Country of Residence
    Current Mileage
    50,000 - 74,999
    Miles per year
    1,000 - 4,999


Total Posts
Visitor Messages
General Information
  • Last Activity: 12-25-2015 06:40 AM
  • Join Date: 05-23-2011
  • Referrals: 0

Social Profiles

Instant Messaging
Send an Instant Message to rbaruffi Using...
This Page

All times are GMT -5. The time now is 10:39 PM.