Ford Truck Enthusiasts Forums - View Profile: Coalroller

Go Back  Ford Truck Enthusiasts Forums > Members
Reload this Page >

Coalroller's Profile

Coalroller is starting off with a positive reputation.

Coalroller Coalroller is offline

Posting Guru

Visitor Messages

Showing Visitor Messages 1 to 10 of 16
  1. 91dirtydiesel
    09-18-2012 11:20 AM - permalink
    7/8" dom with 3/4" heims...ballistic fabrication is where I bought it
    12-04-2011 07:03 PM - permalink
    any good quality fluid meeting ford specs for Mercon V.
    i used Mercon first,but researched and see the V is more to stick with the latest and greatest,since it's compatible with our trans.
    just about any filter made for trans fluid is good.
    im using both of those filters lol.
    the Magnefine for my powersteering/hrdyoboost and the Wix for the trans.
    just need to make sure to change them regularly cus you don't want to restrict flow.with a trans temp gauge though,it would be pretty obvious.
    im swapping 'em out every flush.30k intervals.
    12-04-2011 06:32 PM - permalink
    good question.for a simple slip in line:
    Magnefine Inline Magnetic Filter is a great choice.
    or of course you can buy a base and changeable filters too like from summit/jegs etc of course.WiX 51622 for replacements for those types.
    if your talking about the internal filter,just be sure to get the correct 4wd or 2wd one and be sure the old O-ring comes out with the old.
  4. 91dirtydiesel
    10-12-2011 08:01 PM - permalink
    hey bro, not sure if you know but this is where the full builds are taking place...there are a few others as well. check it out! 6.9 - 7.3L IDI Diesels 83-93 Model Years - PowerStrokeNation
  5. snaponprofile
    03-12-2011 10:45 PM - permalink
    Ok thanks, I ended up just tapping the crossover cause I figured it wasn't gonna work with the banks probe.
  6. snaponprofile
    03-12-2011 04:17 PM - permalink
    Hey coal, did you have to use the glowshift pyro probe? Cause I hooked it up to my banks probe and its reading like 900 degrees cold. When I hook it up to the glowshift probe it reads correctly, I assume I'll have to use their probe provided?
  7. idiguy
    12-24-2010 10:43 PM - permalink
    Posted some pics of a project truck i did about 3 years ago your truck kinda reminded me about it.
  8. oreocreaming
    09-17-2010 10:23 AM - permalink
    hey bud, i might have a complete body block kit for you if your looking. it comes with the new bumper brackets and everything for 150. i didnt care, because my everything is home made and just welded it to the frame lol but let me know if your interested.
  9. oreocreaming
    08-24-2010 10:18 PM - permalink
    only thing is man, is my girl is a 90, just has a 92 front clip. Once I get the 5.38's in I think i'll be back in track with the speed-o. Thanks for the heads up though
  10. oreocreaming
    07-01-2010 01:00 AM - permalink
    im 15 mph off. i was going to get the speedo gear for it but im planning on getting lower gears for my front and rear end so theres no sense until i do that.

About Me

  • About Coalroller
    i work for Line-X spray in bed liners
    Hagerstown, Md
    working, making my trucks bigger and better everyday, working some more, and playing with my toys
    2 Letter State/Province (use "--" for outside USA/
    Country of Residence
    Current Mileage
    150,000 - 199,999
    Miles per year
    Rather not say
  • Signature
    94 f350 7.3 turbo 180,000 and still running strong, e4od, 4x4 Dana 60, lifted with 37's, B.W. tc, 10.25 sterling rear w/4.10s


Total Posts
Visitor Messages
General Information
  • Last Activity: 03-06-2015 08:27 PM
  • Join Date: 12-30-2009
  • Referrals: 0


Showing Friends 1 to 10 of 14

Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service

© 2018 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to and affiliated sites.