Ford Truck Enthusiasts Forums - View Profile: reverendxlt

reverendxlt is starting off with a positive reputation.

reverendxlt reverendxlt is offline

Junior User

Visitor Messages

Showing Visitor Messages 1 to 10 of 13
  1. reverendxlt
    08-16-2011 10:39 AM - permalink
    no problem, glad you found it!
  2. 79F150rebel
    08-12-2011 11:33 PM - permalink
    im sorry to say this but i found the bracket from when my old man pulled the engine.. i have it siitin in the truck just got the motor bolted in today.. i really do appreciate your effort to help me out, tho man. thanks alot
  3. reverendxlt
    08-11-2011 11:43 AM - permalink
    sure, $18 should cover it with shipping I would imagine. You can send a money order to Joshua
    Meier 6929 Marble Canyon, El Paso, TX 79912. As soon as I get it will send it out.
  4. 79F150rebel
    08-11-2011 11:02 AM - permalink
    my towers are gonna work just had to do some fabrication but id still like to buy that bracket if we can work that out
  5. reverendxlt
    08-09-2011 09:46 PM - permalink
    is the motor sitting on the towers? Does it look like there's enough clearance between the cross member and the oil pan? If I put the 360 back in on these towers, I am pretty sure it would hit the cross member.... but that too is just a guess.
  6. reverendxlt
    08-09-2011 09:42 PM - permalink
    I don't remember what the measurement was, as I needed it to move both down and back for the bell housing to fit. These were a decidedly different angle than the ones for the particular the driver's side IIRC.
  7. 79F150rebel
    08-09-2011 01:38 PM - permalink
    oh, do you remember my any chance what the distance from the center hole on the towers to the face of the bellhousing was? my bellhousing is on the tranny now and ive taken measurements the towers i have would work but they need to come back exactly 1 3/4" for the motor mounts to sit properly.. should i try and use them or what? im lost here its my first swap..
  8. reverendxlt
    08-08-2011 08:50 PM - permalink
    I don't know about the 300ci, I replaced the 360 with a 302. The 302 towers set the motor farther back and lower by quite a bit. There's no way that the bellhousing would've bolted on properly without the correct towers, in my case at least.
  9. 79F150rebel
    08-08-2011 07:49 PM - permalink
    ok, the grime is fine. haha, so whats the difference from the 300ci towers and the towers you have? and money order is fine with me Gimme a call to get your address and ill give ya mine as well. 8149772185
  10. reverendxlt
    08-08-2011 07:35 PM - permalink
    would be quicker with a money order. I will take a check, but will need it to clear both banks before I ship the parts. I have the parts available right now, I just took them out of the truck a week ago. They are not rusted out, one has some power steering grime on it...

About Me

  • About reverendxlt
    2 Letter State/Province (use "--" for outside USA/
    Country of Residence
    Econline or E-Series
    Current Mileage
    50,000 - 74,999
    Miles per year
    10,000 - 14,999


Total Posts
Visitor Messages
General Information
  • Last Activity: 01-17-2018 12:38 PM
  • Join Date: 09-13-2009
  • Referrals: 0


Showing Friends 1 to 1 of 1

All times are GMT -5. The time now is 10:06 AM.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to and affiliated sites.