Ford Truck Enthusiasts Forums - View Profile: Ziggy.



Ziggy. has a great reputation on FTE.Ziggy. has a great reputation on FTE.Ziggy. has a great reputation on FTE.Ziggy. has a great reputation on FTE.

Ziggy. Ziggy. is offline

Posting Guru

Visitor Messages

Showing Visitor Messages 1 to 10 of 29
  1. ben duncan
    03-29-2014 10:44 AM - permalink
    ben duncan
    hi ziggy do you have or can get a set of core fuel injectors for a 7.3 , put a set of 160 100 in my truck and looking to sell them and put in different injector let me knowif you can . planning to be at rre in july, also have ae scanner looking to sale send me a email thanks ben duncan
  2. ben duncan
    10-16-2013 10:09 AM - permalink
    ben duncan
    hi cory i met you at rre event in july i was in the eagle rv across road from the cabins , we are in seriville tn for abou t 2 weeks ,would like to see you ,how can we get together, call me at 919 5003151 thanks ben duncan
  3. Nathanbl
    03-15-2012 02:15 PM - permalink
    Nathanbl
    Hi Cory,

    I have been reading all of the info that I can find on 7.3 rebuilds and, as result, ended up here.

    I've got a 2000 F-250 with 330k (bought it used in 2001 with 6k). I've done some basic mods already and do all of my own maintenance, but she's starting to shake a bit with a miss. I figure that it's time for a rebuild - you know, to get me through the next 10 years and 300k miles. (I really don't want a new truck with a DPF and SCR.)

    Anyway, can you tell me where you bought your rebuild kit? I couldn't find the info in the thread.

    I already have single shots, some light tuning and a larger HPOP. I'm not looking for any huge improvement, so will likely stay with the stock valve train.

    Thanks!
    Nathan Larson
  4. mueckster
    05-28-2011 08:41 AM - permalink
    mueckster
    Thanks for the measurements. The tool turned out great. I still need to try it out, but it looks like it will do the job.
  5. SLUF681
    05-02-2011 12:39 AM - permalink
    SLUF681
    Happy Birthday to Us!
  6. Zapped
    03-27-2011 12:38 PM - permalink
    Zapped
    Hello Cory, I doubt you remember me but you helped me out with a window problem on my99 f350 at last years get together that RiffRaff sponsored but I wanted to thank you again and ask another question. I tow a pretty heavy (18K) 5th wheel and last year while in a campground I had to stop on a 4 - 6% grade to wait on an RV to move and when I started to move I got quite a bit of vibration, I was wondering if you think I may have some U joint issues, or something with grease in the slip joint(?). I just had a BTS transmission intsalled last and it runs just fine except for that vibration when starting from a stop on an uphill grade loaded. I appreciate it, oh btw how are things going in the mines for you?

    Later Mark (Zapped)
  7. WA.Ranger
    03-15-2011 11:55 PM - permalink
    WA.Ranger
    Cory, I found out what was wrong with my pass. seat heater, no need to look for that part I asked you to look for. Thanks man!
  8. PaysonPSD
    12-27-2010 07:04 PM - permalink
    PaysonPSD
    A big thanks back at you Cory.

    Take care.
  9. megawatt00
    08-04-2010 06:04 PM - permalink
    megawatt00
    Thanks Brother I feel the same way! I enjoyed every bit of the time that we had at RRE as well..........I am so looking forward to seeing you again soon. JL misses you alot as well!!
  10. N V US Lawn Care
    03-02-2010 01:21 PM - permalink
    N V US Lawn Care
    What do you want for that IDM Cory...I'll help out all i can...here's my address:

    David Hull
    5105 Nolen Ave. Box 13
    Huntsville, AL 35801

    if you need to call me: 256-690-6267

About Me

  • About Ziggy.
    Location
    Blaine, TN
    2 Letter State/Province (use "--" for outside USA/
    TN
    Country of Residence
    US
    Make
    Ford
    Model
    F-250
    Year
    2002
    Current Mileage
    100,000 - 124,999
    Miles per year
    20,000 - 24,999
  • Signature
    Cory--689hp, 1340 ft-lbs
    2002 F-250 SCSB 4x4 6spd, full custom air ride on 38'' Nittos, hyd steer assist, forged rods, 250/100, GQSSB turbo, Stage 1 cam, Tuned by Matt, 6637, CPR+ Reg Rreturn,140v IDM, South Bend DD 3600, Excursion aux fuel tank, ATI dampner, 26925 springs, SmithBro pushrods, 08 Seats, Big intercooler, CCV, Hutch & Harpoon, and alot more.
    Quote:
    Originally Posted by jdecker88 View Post
    Can't is not in Cory's vocabulary he's like Chuck Norris with a wrench

Statistics

Total Posts
Albums
Visitor Messages
General Information
  • Last Activity: 09-09-2014 07:46 AM
  • Join Date: 02-14-2009
  • Referrals: 0

Friends

Showing Friends 1 to 10 of 25

All times are GMT -5. The time now is 03:17 AM.


We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.