Ford Truck Enthusiasts Forums - View Profile: Ford Fx4

Go Back  Ford Truck Enthusiasts Forums > Members
Reload this Page >

Ford Fx4's Profile

Notices
Ford Fx4 has a good reputation on FTE.Ford Fx4 has a good reputation on FTE.

Ford Fx4 Ford Fx4 is offline

Posting Guru

Visitor Messages

Showing Visitor Messages 1 to 7 of 7
  1. juliolop
    01-16-2018 08:28 AM - permalink
    Hi Ford Fx4
    I saw this old post and I need your help to replace my manual mirrors for a powered towing set
    can you help me with the schematic wiring ?
    the connectors match?
    thanks
  2. Magic332
    11-11-2011 06:37 PM - permalink
    Hey the FX I was reading the threads and I was told that yours was the best to look at for tow mirrors, I could use your help. I installed mine on my 2008 FX4 that had normal power but no turn or anything. From everything I have read or saw, it should be plug and play with no problems besides the heated part, but when I installed it only the mirror directions work nothing else, I looked at the pin diagram and it looks like I dont have a ground but that doesn't seem right, I was wondering if you have heard of this problem or if you have a wiring diagram I could look at. Thanks in advance.
  3. steady
    10-07-2011 09:47 AM - permalink
    I was wondering if you could send me a wire and pin diagrams for the towing mirrors with turn signals and puddle lights. I purchased the lights for my 04 FX4, my truck has heated mirrors, and it has an 8 wire harness. The mirrors I bought have an 8 wire harness as well. How do I go about getting the puddle light to work? Thanks in advance jeff
  4. Lane1971
    04-19-2011 05:52 PM - permalink
    I saw your post about the mirror wiring for the tow mirrors and am wondering if you could explain something for me please. I bought a 06 F150 and I'm adding the tow mirrors to it, I currently have regular power mirrors. My question is this, on the new mirrors (made for a 07) pin # 2 calls out as "exterior rear view mirror, signal return". Do you know what the function of that is? I know my current 06 wiring has a ground at pin 2. Also, do you know if pin # 1 is the pin I'd use to send +12 VDC for the heat? Would I need to run a ground anywhere for the heaters or are they grounded internally inside the housing? I've been reading through forums and it seems folks are sitching a lot of pins/wires and I'm just trying to get it straight whats being moved and their functions. Thanks for any help.
  5. Ford Fx4
    07-19-2010 01:53 AM - permalink
    Sorry, but I have had the standard mirrors that I took off sold a long time ago
  6. greenscrew07
    07-15-2010 01:44 PM - permalink
    I HAVE A SET OF THESE MIRRORS I WOULD SELL OR EVEN TRADE FOR THE STANDARD MIRRORS
  7. meganjoe
    08-01-2009 02:16 PM - permalink
    hi.. i saw your name mentioned in a post about emblems.. i am looking sor the front grill emblem and the tailgate emblem for my 2006 f-150... any help would be appreciated.. thanks, Joe

About Me

  • About Ford Fx4
    Location
    land of 10,000 lakes
    2 Letter State/Province (use "--" for outside USA/
    mn
    Country of Residence
    US
    Make
    Ford
    Model
    F-150
    Year
    2006
    Current Mileage
    25,000 - 49,999
    Miles per year
    10,000 - 14,999
  • Signature
    2019 F-350 Lariat CCLB 6.7

Statistics

Total Posts
Visitor Messages
General Information
  • Last Activity: 02-15-2019 08:20 PM
  • Join Date: 05-04-2006
  • Referrals: 0

Friends

Showing Friends 1 to 1 of 1

Contact Us About Us Archive Advertising Cookie Policy Privacy Statement Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.