Ford Truck Enthusiasts Forums - View Profile: Mark Kovalsky

Mark Kovalsky has a superb reputationMark Kovalsky has a superb reputationMark Kovalsky has a superb reputationMark Kovalsky has a superb reputationMark Kovalsky has a superb reputationMark Kovalsky has a superb reputationMark Kovalsky has a superb reputationMark Kovalsky has a superb reputationMark Kovalsky has a superb reputationMark Kovalsky has a superb reputationMark Kovalsky has a superb reputation

Mark Kovalsky Mark Kovalsky is offline

Post Fiend

Visitor Messages

Showing Visitor Messages 1 to 10 of 681
  1. trk pny
    09-19-2017 04:36 PM - permalink
    trk pny
    thank you for the information. I was not sure if it was a fit. So many people kept saying it could have different tail shaft , number of starter bolts and cross member mount.?
  2. Mark Kovalsky
    09-10-2017 08:02 AM - permalink
    Mark Kovalsky
    Thank you for the kind thoughts. The next 9-12 hours are going to be interesting. The eye is heading up the west coast and I'm on the east coast. But this thing is so massive that we will be right in the middle of it.

    Please explain what you want to understand. I created many of the tunes for Ford. That was my job there for most of the 19 years I was there.

  3. realdann
    09-10-2017 06:45 AM - permalink
    I have enjoyed your posts for several years. I hope you and yours are safe as Irma passes. I have a 2002 F350 7.3 4r100, Greg Evans/Dieselsite design. 380 hp engine up grades. I have the Minotaur PHP tuning system and have been having the dickens of a time trying to get the shifts right. Would you help me to understand the shift hierarchy? And maybe some definitions of terms? I know where I want to make shifts, just trying to let the computer know. Thanks
  4. EO2SeaBee
    08-12-2017 02:16 PM - permalink
    Thank you for the reps and for providing insight to the group. I'm amazed at how hard headed some can be.
  5. tombo87
    08-07-2017 08:44 PM - permalink
    code 33 took egr off and cleaned and replaced gasket,with applied vacum I get continuity,late shift 3500 to 4000 rpm to 2nd? or 3rd unless I let up at 2500 and It will shift hunts between 3rd and forth,od on /off seems to make no difference.If I put my foot in throttle neutrals out high rpm no gear or slippage? Put foot on brake will turn tires.Pulled psom today looked good .I found brake light upper roof mount burnt out socket replaced same.Blown 25 amp fuse for trailer replaced and did not blow again. Thanks Mark
  6. tombo87
    08-06-2017 10:19 PM - permalink
    Hi Mark,I have used your advise and pulled codes on 1996 f250hd 5.8l 4x4 e4od 8-351 I have had multiple codes and replaced vss,mlps,map,tps,rebuilt acumulator with sonnax,and replaced shift solonoids also fluid and filter.Shifts manually fine.In Drive 3500 rpm before it shifts sometimes hunts and downshifts hard.Please lead me electrically what to do next.Thanks Tom
  7. Sara Byrd
    08-02-2017 03:05 PM - permalink
    Sara Byrd
    Will do picking one up now to replace.
  8. Sara Byrd
    08-02-2017 11:33 AM - permalink
    Sara Byrd
    Hey mark! Thank for info on my 7.3
    Was reviewing other threads you posted on and thing,I have issue pinpointed. It started just randomly shifting into neutral when driving.. Bad TRS sensor I believe! Going to get a new one when I go into town!
  9. schoo
    07-29-2017 06:26 PM - permalink
    Thank you any way
  10. schoo
    07-29-2017 08:36 AM - permalink
    Hi mark we have a thread over on the 48-56 forum and I was hoping you could add some to our discussion it's called Aod throttle valve adjustment by 56panelford any help would be appreciated

About Me

  • About Mark Kovalsky
    Former Ford automatic transmission engineer.
    SE Florida
    Flying, Antique cars and fire trucks.
    2 Letter State/Province (use "--" for outside USA/
    Country of Residence
    Econline or E-Series
    Current Mileage
    125,000 - 149,999
    Miles per year
    0 - 999
  • Signature
    Former Ford Automatic Transmission Engineer 1988 - 2007

    Nobody has made MERCON since 2006. MERCON V replaced MERCON. Get over it.


Total Posts
Visitor Messages
General Information
  • Last Activity: Yesterday 01:53 PM
  • Join Date: 08-13-1999
  • Referrals: 1


Showing Friends 1 to 10 of 84

All times are GMT -5. The time now is 03:17 AM.