Ford Truck Enthusiasts Forums - View Profile: Blueoval_boy_64

Blueoval_boy_64 is starting off with a positive reputation.

Blueoval_boy_64 Blueoval_boy_64 is offline

Senior User

Visitor Messages

Showing Visitor Messages 1 to 10 of 10
  1. BruteFord
    06-24-2014 06:37 AM - permalink
    I really dig your truck, the bobbed bed is inspiring.
  2. arod1256
    11-04-2013 09:12 PM - permalink
    Hello I am currently putting on a vortech kit and I would like to do the same MAF conversion. Can u please tell me what you used and if your truck has the e40d
  3. JackedBlack
    02-18-2013 03:22 PM - permalink
    Ran across a image of a gooseneck hitch stripper pole you made on google. Picture was small. How did you do that and do you have any other pictures?
  4. Florida 350
  5. Special Ed
    05-15-2011 01:05 PM - permalink
    Special Ed
    Your bumpers are amazing! Looking for some options after getting pulled over & given a ticket for height. Do you make these on the side? If not, any advice you can give on achieving a similar product? Any info would be deeply appreciated. Thanks, Ed
  6. Prozon
    10-11-2009 03:28 PM - permalink
    Enable Private Messeging.

    Go to your User CP.
    On the left side click options. (11th on the list.)
    About the fifth one down is Private Messeges.
    Click enable.

    And then you'll be able to recieve some, instead of using visitor messages.
  7. Prozon
    10-10-2009 12:27 PM - permalink
    And I noticed the other messege.

    From 4Wheeling79.. the transmission is an E4OD.. which really isn't the strongest. But I believe it is built. I'd go for a 460 as he has planned, would work with the transmission too.
  8. Prozon
    10-09-2009 12:58 AM - permalink
    Hey! You should post some more pictures of your bumpers in my bumpers thread. Nice picture you posted btw.

    Why don't you have any other means to contact you other than vistor messeges??
  9. 4wheeling79
    07-28-2009 09:58 AM - permalink
    I see that you have a 351w so your tranny will not work with a big block. But you could stroke that 351 and convert your existing wire harness to mass air and use a 96 351 processor. That should get you all the power you would need.
  10. crazyredneckanyhow

About Me

  • About Blueoval_boy_64
    Pleasant Hill OR
    2 Letter State/Province (use "--" for outside USA/
    Country of Residence
    Current Mileage
    125,000 - 149,999
    Miles per year
    Rather not say


Total Posts
Visitor Messages
General Information
  • Last Activity: 04-23-2015 06:36 PM
  • Join Date: 02-21-2004
  • Referrals: 0


Showing Friends 1 to 3 of 3

All times are GMT -5. The time now is 08:02 AM.