Ford Truck Enthusiasts Forums - View Profile: mechelement

mechelement has a good reputation on FTE.mechelement has a good reputation on FTE.mechelement has a good reputation on FTE.

mechelement mechelement is offline


Visitor Messages

Showing Visitor Messages 1 to 10 of 18
  1. FEF777
    04-07-2014 01:11 PM - permalink
    Hello, I am from Argentina, and I want to buy your metal return caps to use in my Econoline V8 7.3 IDI 1991. How much is the complete kit of 8 return caps and the shipping cost to Argentina? Thank you very much!
  2. srqdiesel chef
    02-13-2014 06:47 AM - permalink
    srqdiesel chef
    mech, I just redid all my lines and it sparked a memory of brass caps. y'all still making those. I checked ebay, but no joy there. let me know, I've got a 92 7.3 na if that makes any difference
  3. vfelix702
    12-26-2012 10:31 PM - permalink
    Mech are you and your pops still making return line caps?
  4. riotwarrior
    12-28-2011 08:45 AM - permalink
    Hey still interested in the any making any? Whats the scoop?
  5. tin lizzie
    12-20-2011 06:31 PM - permalink
    tin lizzie
    Hi there, not sure how often you read these messages, but I've been reading through: I have a 2005 F-350 with the dana 60 front axle and am about to do both inner seals. I haven't done this job before so any additional advice/tips appreciated. Also, recommendations to get the old seals out without damaging anything, plus I will meed to make a tool to install the seals - recommendations? The service manager at the dealer here said I should be able to just tap them in evenly, but I'm a bit skeptical on that point since everyone else seems to be either buying or making a tool.
    [email protected] if you have any intel that will help - starting the job in the next day or so.
  6. fritzman559
    10-05-2011 12:23 PM - permalink
    I also need those caps, for the 6.9N/A how much do you want for a set? and do you include viton orings? thanks so much!
  7. Roostre
  8. riotwarrior
  9. riotwarrior
    12-30-2010 07:13 PM - permalink
    Hello, I found your return caps from a link on oilburners. I would love to get a set for my 7.3 IDI Turbo engine. Are you or have you got the 7.3 caps made? How much? Need them shipped to

    Al McCormick
    2025 Barcelo Rd.
    Cawston BC.

    cheapest US Parcel Post quote please?

    Also if you could quote me shipping to
    Oroville WA.
    buisness address to be provided.

    I sometimes can get parcels in Oroville it's a 30minute drive from me.
    also I don't do much on this board could u email me at [email protected] please?
  10. Tknomaj
    12-20-2010 08:41 PM - permalink
    please let me know the costs of 7.3 turbo brass return line caps with 5/16 barbs and where to send Money Thanx Allen

About Me

  • About mechelement
    Boise, ID
    2 Letter State/Province (use "--" for outside USA/
    Country of Residence
    Current Mileage
    100,000 - 124,999
    Miles per year
    15,000 - 19,999
  • Signature
    2000 F350 XLT PSD CC 6-sp SRW 4x4 - 6637
    1986 F250 XLT Lariat supercab 4x4 6.9L IDI T-19, 4.10's


Total Posts
Visitor Messages
General Information
  • Last Activity: 08-01-2016 11:35 PM
  • Join Date: 10-04-2008
  • Referrals: 0


Showing Friends 1 to 2 of 2

All times are GMT -5. The time now is 05:23 PM.