Ford Truck Enthusiasts Forums - View Profile: fatfenders

fatfenders has a good reputation on FTE.fatfenders has a good reputation on FTE.fatfenders has a good reputation on FTE.

fatfenders fatfenders is offline

Post Fiend

About Me

  • About fatfenders
    Married, one child
    2 Letter State/Province (use "--" for outside USA/
    Country of Residence
    Current Mileage
    75,000 - 99,999
    Miles per year
    20,000 - 24,999
  • Signature
    53 F100
    302-C4-Low and Slow
    94 Mustang GT
    347 Stroker- Not Slow


Total Posts
Visitor Messages
General Information
  • Last Activity: 12-19-2017 05:19 PM
  • Join Date: 02-17-2001
  • Referrals: 0


Showing Friends 1 to 10 of 17

Visitor Messages

Showing Visitor Messages 1 to 10 of 13
  1. bigwin56f100
  2. bigwin56f100
    10-30-2015 09:28 AM - permalink
    I see you are reading the thread I bumped for you!
  3. bigwin56f100
    10-30-2015 09:15 AM - permalink
    I think there may be close to 20 here! Just picked up 2 bigwindow cabs and a rear section. CRAZY!
  4. bigwin56f100
    10-30-2015 05:56 AM - permalink
    welcome back AGAIN!
  5. 08-29-2015 04:39 PM - permalink
    Fatfenders, wondering if you might be able to help me . I have a 54 ford pick up with a volare IFS. It was installed by Bob in Pomona, California and its notched into the frame. When I got it home I replaced the upper and lower ball joints and control bushings and have only put on 5000 miles on it. My truck feel like its bottoming out on any bumps I go over. I took it to a front end shop and he told me everything looks good under the truck. I looked at the torsion bar and sway bar bushings and they seem tight. so my question is what am I missing? any help would be most appreciated. I do have a 302 and T-5 I installed and my ride height is adjusted close to the middle of the adjustment and shocks were put in with the ball joints.
  6. 10-05-2013 02:06 PM - permalink
    Hi Fatfenders:

    BJ Mayberry recommended that I get in touch with you. I am located in IL just north of Galesburg. He said you may have some spare 53 f100 parts, but, if not, just the ability to have someone local that has done this to ask questions would be great. If you do have parts I am looking for hood, fenders and grill for now. Just getting started so in no hurry.

  7. bjmayberry2
    04-09-2013 07:48 AM - permalink
    Where is FTEs Market Place? I see it mentioned but I cant find it. Still looking for a good 56 drivers door.
  8. fatfenders
    02-18-2013 09:48 AM - permalink
    Good to hear from you Lynn. Yeah I finally made it back to the forum.
  9. 02-18-2013 09:18 AM - permalink
    Hey Fenders,
    Don't get to the board very often. Good to see your name on the board. Took some time at Christmas and got the engine built for Joey's 68 F-250. Need to get the driveshaft qualified out and installed and will have the complete driveline in place. It has been a long road but am getting things done. The goal was to get it done for the 4th of July but too many things getting in the way.
    Hope all is well with you and the family.

    Gear Up
  10. bjmayberry2
    02-01-2013 02:11 PM - permalink
    Still trying to learn how to work within FTE. Great stuff in here!!!!

Contact Us - About Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to and affiliated sites.