Ford Truck Enthusiasts Forums - View Profile: fordman75

Go Back  Ford Truck Enthusiasts Forums > Members
Reload this Page >

fordman75's Profile

Notices
fordman75 is a name known to allfordman75 is a name known to allfordman75 is a name known to allfordman75 is a name known to allfordman75 is a name known to allfordman75 is a name known to all

fordman75 fordman75 is offline

Postmaster

Visitor Messages

Showing Visitor Messages 1 to 10 of 32
  1. old28
    01-05-2018 09:15 PM - permalink
    Thanks Ted, I will see if I can find a set of stock units so I can try my hand at porting them like you did. They look real nice. Tom
  2. fordman75
    01-05-2018 04:02 PM - permalink
    I've only got one left. I believe it's a rear one. It's one I picked up last year to port. I posted some pictures of it in your gasket thread. I've got a bit of time into porting it. So I would need $75.00 for it( not including shipping cost ) .
  3. old28
    01-05-2018 12:24 PM - permalink
    Ted, Hello & Happy New Year.

    On my mild 300 street motor I am working on I was going to run a HD Exhaust Manifold but at $275 it is out of my range so as a second plan I am leaning towards a pair of dual EFI exhaust. Wanted to ask if you might have a used pair for sale that will bolt onto my 1992 EFI head? Thanks Tom
  4. fordman75
    12-17-2017 11:49 AM - permalink
    Looks good Tom.
  5. old28
    12-16-2017 07:55 PM - permalink
    Ted:
    Sent a picture of the rebuild Remy alternator and the fan. Brackets have worked out fine. Had to add a couple of spacers to the alternator tension rod so it moved out a little to have clearance for the radiator hose at the water pump. Looks like it will work out fine. Thanks Tom

    https://image.ibb.co/ne8Z76/300_Motor_42.jpg
  6. fordman75
    12-11-2017 06:44 PM - permalink
    It's looking good. I believe they offer those alternators in outputs from the mid 30's up to 65 amp.

    You got the fan on the right way.
  7. old28
    12-10-2017 07:17 PM - permalink
    Ted, I got most of the parts painted, industrial gray for the motor & head, black for add on parts. The top bracket for the alternator bolts in fine and should clear the 600 HD exhaust manifold. All the fan/water pump pulley parts look good. I ordered an alternator for a 65 240 from Rock Auto, it is a 42 amp unit that should be fine for now as I have no idea what it will go in and I will have it on a run stand for awhile. Rebuilt Remy for $37.

    I have tried to send 4 pictures for you to open and look at. In the pictures of the fan I am not sure I have the fan in the right direction? It is mounted with the blade pointed end towards the motor. Is that correct or should they face the radiator?

    Thanks Tom

    https://image.ibb.co/gkZ8sw/300_Motor_38.jpg

    https://image.ibb.co/h2tq5G/300_Motor_39.jpg

    https://image.ibb.co/cZDezb/300_Motor_41.jpg
  8. old28
    12-05-2017 06:26 PM - permalink
    Ted, Thanks for the information on the parts. Glad everything is on track. I am sure you have seen that we have a big wind driven wild fire here in Ventura County, we are fine, the fire is about 5 miles from are place but it is affecting all delivery in our area. This is a bad one with over 150 homes and ranches burned so far. Winds are 35-55 and fire is totally out of control. Looking forward to getting the parts, will PM you when they arrive. Tom
  9. old28
    11-23-2017 01:02 PM - permalink
    Ted,
    Happy Thanksgiving to all. After I sent PM to you last night I was thinking that I needed to ask you if you have the brackets to mount the alternator to the block & the bracket Pc to tighten the belts. I do not know if the 240/300 block mounting holes are in the same place on my 1992 300 block. When I got this motor it had none of the add on Pc.
    If you do have them please get me a price and figure them in the package shipping price. Thanks Tom
  10. juancho_uy
    11-14-2015 08:25 PM - permalink
    Hi, how are you, sory about my english, Im from uruguay South America, Im working on a 300ci engine project, y send my head for valvle, chamber, and othr job. Now I bought a steel crank, custom cam, forged rod and pistons, 12 225 injectors, and Furltech FT 500 computer. I will put on it a Precision turbo I think 1500 hp aprox. What do you think about that? Block is resistent? Do you still lookinf ford 1000+ Thanks a lot.

About Me

  • About fordman75
    Location
    South central, Minnesota
    Interests
    Fords
    2 Letter State/Province (use "--" for outside USA/
    MN
    Country of Residence
    US
    Make
    Ford
    Model
    F-100
    Year
    1954
    Current Mileage
    Rather not say
    Miles per year
    Rather not say
  • Signature
    Ted

    1954 F100 4x4, 300, NP435/NP205

Statistics

Total Posts
Albums
Visitor Messages
General Information
  • Last Activity: 05-26-2018 01:04 PM
  • Join Date: 12-24-2000
  • Referrals: 1

Friends

Showing Friends 1 to 10 of 11

Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.