Ford Truck Enthusiasts Forums - View Profile: '89F2urd

'89F2urd has a very good reputation on FTE.'89F2urd has a very good reputation on FTE.'89F2urd has a very good reputation on FTE.

'89F2urd '89F2urd is offline


About Me

  • About '89F2urd
    2 Letter State/Province (use "--" for outside USA/
    Country of Residence
    Current Mileage
    200,000 - 249,999
    Miles per year
    5,000 - 9,999
  • Signature
    '89 F2 4x4, HPKP D60, ZF5, Fixed output 1356, 351: ported/milled gt40P's, 10.5:1, 35-255-5, .060 bore, long tubes, 37" MilOZ, etc.
    -'02 dodge 2500 6 spd cummins, 375k miles: 545/1240 rwhp/tq
    -'01 c5 z06; 421ci, 6 spd, magnacharged, 688/740 rwhp/tq
    -'84 FJ60 LC - 4bt/nv5600; 320/750 whp/tq
    -'97 F250, 2wd, e4od, 351: afr 165, 444211, eddy truck intake, long tubes


Total Posts
Visitor Messages
General Information
  • Last Activity: 07-02-2019 12:32 PM
  • Join Date: 05-05-2011
  • Referrals: 0

Visitor Messages

Showing Visitor Messages 1 to 10 of 19
  1. 04-26-2018 03:52 PM - permalink
    Hello new to site, not sure who or how to get help I have a 1988 f150 5.0. In the winter the mpg drops by 3 or 4 mpg, probably the stuff they call gas here in denver but my main question is that it goes through map sensors like candy, checked what I can like 5volts ground and so on any help would be appreciated cause truck is no longer dependable and my have to put the old girl down
  2. 06-16-2016 10:50 AM - permalink
    1988 Ford F150 cranks but will not start...HELP
    Running in I-95 70MPH truck just shot down. NO POWER to the sparks
    1. I changed the module in the distributor
    2. Them changed the distributor COMPLETE becausae still no power
    3. Changed the coil too
    4. There's power to the coil when key on
    5. There's power in the distributor plug/connector when key on
    6. check all fuses in the interior and they are good
    7. Still no power in the spark plugs when cranks

    Running out of ideas, I'm new in the portal.

    Thanks in advance

    New some help, I don't know how to post this i the forum
  3. 05-04-2016 12:29 PM - permalink
    in a recent post by you, about a 351w 5.8l

    You can get rid of a lot of the hoses and vac lines. Remove air pump and all associated parts/hoses. The only vac lines you need to keep are:

    -line to fuel press regulator directly off manifold
    -line to map sensor directly off manifold
    -line to coffee can from intake, from coffee can to egr solenoid, from solenoid to egr valve.
    -line to brake booster

    everything else can be deleted, although it's not a bad idea to keep the evap system in tact as it has no adverse effects on performance and can make your truck smell like gas when parked on hot days.


    Could you elaborate more on exactly what can be deleted. I recently purchased a 95 f350 with a 5.8l in it. truck runs, but not the best. I would love to get rid of anything thats not needed under the hood. Next to the coil I believe its called TAB, TAD can I lose those as well?
  4. 04-29-2016 05:22 PM - permalink
    Hey man Thank you for the help with my truck. The 460 Computer was the best thing sense sliced bread.
  5. '89F2urd
    12-26-2014 02:05 PM - permalink
    Just returnin the favor!
  6. Redneckfordf2502002
    12-26-2014 01:34 PM - permalink
    thanks for the reps man.
  7. '89F2urd
    10-15-2013 06:40 PM - permalink
    ha! sure thing. I don't think people like giving me all that much rep, however. facts aren't always friendly.
  8. Ninra
    10-15-2013 06:31 PM - permalink
    Hey, Elder user, don't you have to give me a reputation point for that "hot air balloon" line!
  9. 06-09-2013 09:02 PM - permalink
    Hey need some support on my 89 f250 and was wondereing if you could maybe give some tips. Im trying to convert my 5.8L 351 from fuel injection into a carborated motor, if you any information about harness situation for ignition system (old/new) or high pressure to low on fuel system please contact me

  10. piglett
    08-30-2011 09:28 PM - permalink
    Baltimore , hell i used to go down to the block when i lived in newark de.
    i live in wolfeboro which is on the eastern side of the "big lake"
    about 30 miles from here your in maine. i have my old 95 toyota pickup & it looks like it maybe live out the rest of it's days as a trail beater. go to get my new ball joints & u-joints in my f250 & i may just put a cheep farm plate on the old yota

    take care

Contact Us - About Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to and affiliated sites.