Conversation Between ATS Junior and Tpndrcn

Hey there Jesse! I just sent an email over to you. Let me know if you didn't receive it. Thanks!

Junior here is my email as well Wright_racing@yahoo.com

Junior, I started a thread titled "Ride after Spring Swap" looking for opinion on whether or not it was worth the money to invest in different springs for my 02,7.3,4x4 Excursion for a better ride. I currently don't tow that often , its mostly used for daily driving and family hauling. I have on a few occasions since owning it hit the bump stops on the front when going over railroad tracks and traveling down some bumpy roads. It does have some sway to it as well. I don't necessarily want to lift the truck but if it has to increase the ride height some to make it better I would consider that option. I just want to keep it off the bump stops and make it the best ride that I can get. Should I stick with similar to factory replacement or go to the SD V/B style springs? Can you give me prices on both kits. Measurements taken from the center of the hub to the lower fender arch:
Driver's front-22"
Passenger's front-22 1/2"
Driver's Rear-23 1/2"
Passenger's Rear-24"
Jesse Wright (815)499-2204