Conversation Between ultraranger and dschem

I attached the endlinks to the C-brackets and the other end of the links to the swaybar. I swung the swaybar assembly up to where the brackets for the forward end of the swaybar bushings came in contact with the underside of the frame and marked the locations of the holes onto the frame, through the holes in the brackets. This was with the tires on the ground and the suspension under normal load and at its normal ride height.

Hello,

I was reading the post where you added a front sway bar to your truck. I have a 1971 that I am adding the same type of sway bar to and I wondered how did you figure out where to put the front bushing brackets on the frame? Is there a measurement to make?

I hope you can help.

Thanks

Dave