Ford Truck Enthusiasts Forums - Conversation Between Tugly and Wesley Green

Conversation Between Tugly and Wesley Green
Showing Visitor Messages 1 to 3 of 3
  1. Wesley Green
    10-16-2017 12:55 AM - permalink
    Wesley Green
    Ok. I was debating using blue 243 but it's break free hold is 40 ft# which is almost 3 times the torqued value of the hold down bolts and didn't want to shear the bolt upon future dissasembly. I think I'll try 222 on the bottom half of the hold down bolts which has a hold of 50 in#, and one or two threads of lightly applied 243 halfway up. Thanks tugly
  2. Tugly
    10-15-2017 08:09 AM - permalink
    I use the blue Permatex with a 1/2 hour dry time. I can't remember the product number... sorry.
  3. Wesley Green
    10-15-2017 03:16 AM - permalink
    Wesley Green
    So just curious, when you hot torque injectors you mentioned that you use a loctite, was it 222?

All times are GMT -5. The time now is 03:11 PM.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to and affiliated sites.