Conversation Between NBC-Steve and Snipershide22
Showing Visitor Messages 1 to 2 of 2
-
Thanks, First find out what doesn't work. Next remove that circuit from the fuse block and start troubleshooting it from there. It sounds like you have something miss wired so I would carefully look at the factory wiring diagram and identify every wire. I suspect you may have wired in the HVAC into the fuse block. As far as the flashers I simply used the Painless flashers and removed the factory flashers. If you look at the wiring diagram it's pretty easy.
Good luck!
-
Hi, great truck. I joined site to ask you about the painless wiring fuse box you installed. I have a 79 f150 and started installing painless system identical to yours. I can see in your pics that I have the right side of fuse panel wired just like yours but have run into a wall on left side. problem one Fuse for Wipers blows immediately- but wipers still work. Problem 2 only thing not working is the turn signals and hazards. How did you by pass flasher relays that came on the truck? Thank you