Conversation Between z scpaes and oreocreaming

i pulled the turbo off a 94 idi. bolts right on, just had to drill out the hole in the back of the block where your oil pressure sending unit goes. thats where your turbo will now get its oil feed from. you will have to drill it out and tap it for a larger fitting. best, easiest, smartest thing to do is buy the complete engine running or not with a turbo on it and take all the parts off it. you need the valve covers, block oil feed fitting, all the exhaust cross over, up pipe, down pipe. also need the rubber grommet that goes from the turbo to the valley. thats the oil return, you can find it on ebay and only ebay cause fords fags and quit making the part. other then that, your alright.

I'd like more details about your engine and setup. I have a 91 7.3l IDI and wondering if you've converted a newer style turbo to go on your engine and how you've adapted to it?