Conversation Between truckdog62563 and Bikelikealocal

Hello Hans. It sounds like your clutch disc has seized to the flywheel. I would first try to start the truck in gear, ensuring that it can safely be attempted in your storage area. That might cause the clutch disc to free itself up. Failing that I fear disassembly might be needed. Stu

Hallo Stu Hans Here, I have a problem with my Clutch after standing still over Vinter, now it will not engage so I can't put it into gear while the motor is running is there a way to come to the pressure plate and fly wheel without taking it all apart hope to hear from you best regards Hans J Grundtvig 1951 Ford F3 MH

Hans - I would rely on Chuck Mantiglia for your brake parts. He is the M-H expert, and would ensure that you get correct parts. For your visit to California the two companies that come to mind are Sacramento Vintage and Mid 50. I've attached links to each. Enjoy your visit. Stu

Home - Mid Fifty F-100 Parts
Sacramento Vintage Ford Parts, Inc. ? 888-Ford-100

good afternoon Stu after using my F3 all summer. My Brakes act a bit strange so i would like to bay,master cyl replacement kit, and found different types, one with a spring from
LNF in Argentina 1 1/4 inch bore Part no 18152
or one from Webco Parts without a spring Part no 1401 (3568)
going to southern California and Bay area 9/11 to 26/11 are there any Ford Truck dealers there looking for, Floor mats weather strip, Door windows, windscreen and rubber in between front fender and bag fender Thanks Hans J G

Glad to help, Hans. Would love to see pictures. Stu

hello again Stu Thanks for helping Me Now my Truck Are Registrated and Running, Im so Thankful For your Help , going to Southern Sweden next Week try too send some Pictures soon Thanks again Hans J Grundtvig Copenhagen

Hans - please email me directly. There is more info I'd like to share than is allowed in this note space. Email is stu_sandymcmillan@sbcglobal.net. Thanks. Stu

god afternoon Stu do you have 5 Studs and nuts for my F3 M/H left front wheel that you will sell thanks again H J Grundtvig

Hans - I am the guy that has the archive of F-2/F-3 axle numbers. It might be that your axle has a different numbering sequence than USA trucks, but I would appreciate having the information you found. I don't believe I have information yet on the other trucks like yours, so yours is a start. Stu

Hallo again Stu i finally found the numbers on my M/H aksel i don't remember who the person was who register it, do you now his name can't find him in my messages, i got 8 of the nuts off Thanks again H J Grundtvig