When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Do you still need help with the power windows and door lock wiring?
I have the wiring schematics for a 88 which should be the same as for a 87.
e-mail me gmc862004@yahoo.com
recently bought 87 f250. Manual doors changed out by previously and now w/ power controls. The windows were hooked up, but the wires cut from the harness at the. Door locks never hooked up and I want to try to make them work.
I started w/ passenger side. I see 5 wires from the door lock control panel, and 7 wires into the harness from the door. Black (power), Black/orange (unlock?), pink/green (Lock?), 2x pink/orange, 2x pink/black.
I cut the black wire from the harness and hooked it up to power, but I could not get voltage across the switch. But I assumed since the window works, the panel should be grounded???
If I give the door lock black wire power, should the lock switch work? What do I need to do to make it work?
Why are there 22 wires of pink/orange and pink/black at the harness; what do those wires do?
And if I "create my own harness", which wires from the driver side do I connect to the passenger harness?