No Start
Thread Starter
|
Freshman User
Joined: Aug 2009
Posts: 33
Likes: 0
No Start
I was fixing the door accuators on my power door locks. While turning the truck off and on I noticed the Wait to Start light quit coming on.
Now the truck won't start. I jumped the glow plugs until they were warm and still not start.
I have not seen any smoke out of the back.
I check fuse 30 and it is good.
It is a '99 7.3 PSD
Now the truck won't start. I jumped the glow plugs until they were warm and still not start.
I have not seen any smoke out of the back.
I check fuse 30 and it is good.
It is a '99 7.3 PSD
Thread Starter
|
Freshman User
Joined: Aug 2009
Posts: 33
Likes: 0
I'll check it. Is it in the fuse box under the hood. I checked them all and I thought they were all right but I didn't use a tester.
I am heading out of town and won't get a chance to look at it until next week end.
I am heading out of town and won't get a chance to look at it until next week end.
Hotshot
Joined: Jan 2008
Posts: 13,144
Likes: 11
From: Rochdale MA
Trending Topics
Thread Starter
|
Freshman User
Joined: Aug 2009
Posts: 33
Likes: 0
I'm back and trying to get the truck running. I have checked the fuses. All are good. I disconnected the batteries incase there was a computer lock out.
The PCM relay and the injector driver module relay (IDMR) click when the ignition switch is turned on. With fuse 30 pulled only the IDMR click.
Any ideas?
The PCM relay and the injector driver module relay (IDMR) click when the ignition switch is turned on. With fuse 30 pulled only the IDMR click.
Any ideas?
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
3 Best / 3 Worst Parts of Modern Ford Ownership
Brett Foote
10 Amazing Upgrades That Solve Common Ford Truck Owner Headaches
Pouria Savadkouei
Every 2026 Ford Engine Explained
Brett Foote
10 Ugly Ford Trucks That We Still Kinda Love
Joe Kucinski
10 Things Every Truck Owner NEEDS (2026 Edition)
Michael S. Palmer
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
Thread Starter
|
Freshman User
Joined: Aug 2009
Posts: 33
Likes: 0
The fuel pump does not run. I pulled the panel off on the right side. How do you reset the switch? The Haynes manual just says reset it. I don't see any obvious way to reset.
BTW the CPS has been replaced.
No chip.
I don't think I did anything to other wiring, but that probably is the problem. I don't see anything wrong.
If the fuel pump doesn't run then does the other systems stay off.
The WTS light does not come on at all!
BTW the CPS has been replaced.
No chip.
I don't think I did anything to other wiring, but that probably is the problem. I don't see anything wrong.
If the fuel pump doesn't run then does the other systems stay off.
The WTS light does not come on at all!
Thread Starter
|
Freshman User
Joined: Aug 2009
Posts: 33
Likes: 0
There is a round opening on top of what looks like the switch. I pressed on it, no change.
I checked the pump with a tester. There is continuty through the pump and to ground. So the pump looks good.
Any other places to check.
I checked the pump with a tester. There is continuty through the pump and to ground. So the pump looks good.
Any other places to check.