1936 Ford 1.5 Ton Stake Beds
Thread Starter
|
New User
Joined: Nov 2001
Posts: 7
Likes: 0
From: Anchorage
1936 Ford 1.5 Ton Stake Beds
I am new to the forum and I have just purchased and received delivery of 2 1936 1.5 Ton Ford Stake Bed Trucks plus an extra flathead engine and tranmission just like the ones in the two trucks. One truck runs and the other does not. They are both in the original state. They have been in the Colorado high country and have only a little surface rust. I will need window glass for one of them. Are these available? I will have to get new oak for both truck beds. However, I am excited about restoring them. Any suggestions, lists of repro companies, parts would be appreciated.
Pat
Pat
Senior User
Joined: Mar 2004
Posts: 172
Likes: 0
From: Beavercreek oh
I think that all the glass is plain flat glass so any auto glass place should be able to cut the windows for you. You may have to give them the old glass to use as a pattern or make one out of cardboard. Check out the reference thread, there is a world of information there. Take lots of pic's and post them. Good luck and have fun!!!!!
John
John
Thread Starter
|
New User
Joined: Nov 2001
Posts: 7
Likes: 0
From: Anchorage
Thanks J
I currently live in Alaska and the trucks are at my farm on the Mississippi Gulf Coast. I get down there about once every 90 days. However, I am going to retire there in 24 months. So, the trucks will be one of many hobbies. I plan on using one on the farm and it will be nice to go to Home Depot or Lowes for stuff and watch the reaction of the people. The man who transported the trucks from Colorado said that he received some many CB calls about the trucks that he was amazed. He also said that every time he stopped at a truck stop there were at least 5 or 6 guys inquiring whether they were for sale. At least I know how to sell one of them if I decide to.
I currently live in Alaska and the trucks are at my farm on the Mississippi Gulf Coast. I get down there about once every 90 days. However, I am going to retire there in 24 months. So, the trucks will be one of many hobbies. I plan on using one on the farm and it will be nice to go to Home Depot or Lowes for stuff and watch the reaction of the people. The man who transported the trucks from Colorado said that he received some many CB calls about the trucks that he was amazed. He also said that every time he stopped at a truck stop there were at least 5 or 6 guys inquiring whether they were for sale. At least I know how to sell one of them if I decide to.
Originally Posted by j wright
I think that all the glass is plain flat glass so any auto glass place should be able to cut the windows for you. You may have to give them the old glass to use as a pattern or make one out of cardboard. Check out the reference thread, there is a world of information there. Take lots of pic's and post them. Good luck and have fun!!!!!
John
John
Lead Driver
Joined: Jan 2005
Posts: 6,104
Likes: 138
From: Orcas Island Wa.
You should look at Dick Cutting's website.Lots of great info and photos of his WORKING 36 Ford 1 1/2 ton and some other big trucks.He loads them with huge log loads.They are nicely restored and it looks like he has a good time with them....I have a 40 1 1/2 ton and a '29 AA 1 1/2 ton and they also get used in my woodworking business. www.cutsoldtrucks.com Gary
New User
Joined: Jan 2005
Posts: 5
Likes: 0
Replacement Glass
You should look at Dick Cutting's website.
We've had a great time using our older rigs but haven't been quite as active with them recently. In fact a few of the trucks shown are no longer owned. But I still have the '41 1½Ton stake truck and the '41 M&H plus a couple of Chevys. Also still have a couple of '46 1½Tons that are looking for a home.
Elder User
Joined: Sep 2002
Posts: 948
Likes: 0
From: McAlester, OK
Well I haven't welcomed you to FTE so here's a slightly late Welcome to FTE! A few of the larger repo companies I can think of is macs auto parts, dennis Carpender, and what used to be absolete Ford parts. www.macsautoparts.com www.dennis-carpenter.com www.classicautoparts.com
Anyways, hope that you enjoy FTE and visit here often with questions of just to chat. Good luck!
Clayton
Anyways, hope that you enjoy FTE and visit here often with questions of just to chat. Good luck!
Clayton
Thread
Thread Starter
Forum
Replies
Last Post
JeffLee
1961 - 1966 F-100 & Larger F-Series Trucks
16
Dec 14, 2017 10:37 AM
Jfieldsfamily
1987 - 1996 F150 & Larger F-Series Trucks
8
Sep 18, 2015 09:49 PM
