Clutch bleeder moves around and can't get it loose
Thread Starter
|
Trailering
Joined: May 2004
Posts: 24
Likes: 0
From: manteca,ca
Clutch bleeder moves around and can't get it loose
96 Ford ranger 2.3 5 sp. What the heck? The bleeder screw is moving around while I'm trying to loosen it. Why? Is the pipe that it's attached to not attached to the slave anymore?
Any help is greatly appreciated.
Any help is greatly appreciated.
Fleet Mechanic
Joined: Jun 2023
Posts: 1,379
Likes: 383
From: WA
Something might have broken. Look at what holds it in place. Might have to grab the tube with some pliers. Be careful, don't put too much stress on the junction where the seal is. Good luck.
https://www.rockauto.com/en/moreinfo...t=2044&jsn=686
https://www.rockauto.com/en/catalog/...+cylinder,2044
https://www.rockauto.com/en/moreinfo...t=2044&jsn=686
https://www.rockauto.com/en/catalog/...+cylinder,2044
Thread
Thread Starter
Forum
Replies
Last Post
wlivers
1983 - 2012 Ranger & B-Series
7
Dec 22, 2004 12:03 AM
