Pro-M Racing EFI
Thread Starter
|
FTE Chapter Leader
Joined: Jan 2006
Posts: 21,360
Likes: 8,071
From: North Central Washington
Pro-M Racing EFI
I'm thinking about going with the Pro-M Racing EFI and coil on plug ignition system for my new 427w stroker.
http://www.promracing.com/fuelsupplysystem
Just wondering if there is anyone here that has had any experience with this system.
I have looked at both FAST and Holley, not much research on the Holley thou.
My original plan was to go with the FAST EZ 2.0 self learning system but with the cam lobe center at 110 degrees it sounds like it doesn't work real. It sounds like the self learning systems work better with the lobe centers more in the range of 114 to 118 if I remember right.
http://www.promracing.com/fuelsupplysystem
Just wondering if there is anyone here that has had any experience with this system.
I have looked at both FAST and Holley, not much research on the Holley thou.
My original plan was to go with the FAST EZ 2.0 self learning system but with the cam lobe center at 110 degrees it sounds like it doesn't work real. It sounds like the self learning systems work better with the lobe centers more in the range of 114 to 118 if I remember right.
Thread
Thread Starter
Forum
Replies
Last Post
highoctane74
Big Block V8 - 385 Series (6.1/370, 7.0/429, 7.5/460)
4
Mar 6, 2011 11:50 PM
truckman9
Big Block V8 - 385 Series (6.1/370, 7.0/429, 7.5/460)
10
Feb 3, 2006 08:07 PM
