351w head i.d.
Thread Starter
|
Freshman User
Joined: Jul 2003
Posts: 30
Likes: 0
From: S.E. Michigan
351w head i.d.
Need your help in identifying some heads that have "WINDSOR" cast in them in the rocker section. Also, they have red roller rockers as well.
Not sure what cam was installed. Just know that the engine was rebuilt at a local speed shop b-4 the engines owner passed away. The engine was only test run. Out of the vehicle
Can anyone help and tell me anything about them.
There mounted on a 351w engine with a "Edlebrock victor jr." manifold, with a Holly (? not sure which one) dual feed carb.
The engine has D8 cast in the block.
Any and all help will be appreciated. I plan on putting this engine setup in my 92 F-150 4x4 w/e4od.
Also, what do I have to do to make the the swap and keep the same trans, (e4od)
Thanks, HAL_419
Not sure what cam was installed. Just know that the engine was rebuilt at a local speed shop b-4 the engines owner passed away. The engine was only test run. Out of the vehicle
Can anyone help and tell me anything about them.
There mounted on a 351w engine with a "Edlebrock victor jr." manifold, with a Holly (? not sure which one) dual feed carb.
The engine has D8 cast in the block.
Any and all help will be appreciated. I plan on putting this engine setup in my 92 F-150 4x4 w/e4od.
Also, what do I have to do to make the the swap and keep the same trans, (e4od)
Thanks, HAL_419
Thread Starter
|
Freshman User
Joined: Jul 2003
Posts: 30
Likes: 0
From: S.E. Michigan
351w head i.d.
This is the only info "WINDSOR" cast into the rocker area. There is a date stamped on the front right end of the block "1988".
As for the engine block, the casting #, it starts out as "D4" rather than "D8"
The engine casting # is D4AE-8015-AA-4, the small # below this is" *658 " from what I can see. I'm not to sure about the (*) b-4 the numbers though. All help is appreciated.
Thanks, HAL_419
92' F150XLT 4X4 302 E4od ( soon to be 5.8)
As for the engine block, the casting #, it starts out as "D4" rather than "D8"
The engine casting # is D4AE-8015-AA-4, the small # below this is" *658 " from what I can see. I'm not to sure about the (*) b-4 the numbers though. All help is appreciated.
Thanks, HAL_419
92' F150XLT 4X4 302 E4od ( soon to be 5.8)
Elder User
Joined: Mar 2003
Posts: 999
Likes: 1
From: Willamette Valley Oregon
351w head i.d.
The engine casting # is D4AE-8015-AA-4, the small # below this is" *658 " from what I can see. I'm not to sure about the (*) b-4 the numbers though. All help is appreciated
Are you sure the casting number isn't 6015 instead of 8015?
I just pulled this info out of a book. It could be in error.
