IPR QUESTION ON CLEANING
Thread Starter
|
Trailering
Joined: Jan 2004
Posts: 20
Likes: 0
IPR QUESTION ON CLEANING
95 f-350, took the ipr out and cleaned it the instructions said the small plunger in the pilot valve should push in about an 1/8' and pop back out. Mine does not even stick out 1/8" and it will not push in it is solid. Someone else told me there is supposed to be a ball under the plunger but I did not find one or I lost it. Anyone know what it should be like.
Thread Starter
|
Trailering
Joined: Jan 2004
Posts: 20
Likes: 0
Thanks for the picture, I need to know if that small needle valve should be able to be pushed into the pilot valve and pop back out mine is solid when you try and push it into the pilot valve and since mine is solid does that mean the insides of the pilot valve are hung up and do not move.
FOREIGN GURU
Joined: Jul 2006
Posts: 7,655
Likes: 7
From: Celaya, Gto. MX
Thank you. I like your new avatar, BFH 
LOL
LOL
Trending Topics
Post Fiend
Joined: Dec 2009
Posts: 15,505
Likes: 18
From: Livoina,La
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
3 Best / 3 Worst Parts of Modern Ford Ownership
Brett Foote
10 Amazing Upgrades That Solve Common Ford Truck Owner Headaches
Pouria Savadkouei
Every 2026 Ford Engine Explained
Brett Foote
10 Ugly Ford Trucks That We Still Kinda Love
Joe Kucinski
10 Things Every Truck Owner NEEDS (2026 Edition)
Michael S. Palmer
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
Laughing Gas
Joined: Apr 2009
Posts: 903
Likes: 9
From: melbourne beach, fl
I've fixed quite a few things with a BFH......as for the ipr,blow out the larger pieces with compressed air and before assembly lubricate with some fine oil,best to replace the o rings on it before reinstall .Good luck!!
Laughing Gas
Joined: Apr 2009
Posts: 903
Likes: 9
From: melbourne beach, fl
ive seen the newer rebuild kits have a screen on the tip that sticks into the hpop side. The new o ring kit is highly recommended when removed. These things get clogged and often cause a no start situation as the hpop oil system tends to not get changed when doing a routine oil change. The only way is to pull the oil up out of the hpop fill hole.
