I just went out and bought the Ford/Autolite/Motorcraft 2100 & 2100D Service Manual and I want to share it with whomever wants it.


Here are the specifications of the document:
-------------------------------------------------------------------------------------------------------------------------------------
Ford/Autolite/Motorcraft Service Manual for: 1958 - 1975 Model 2100 Carburetors
Table of Contents

• Cover
• Introduction
• Restoration Tips
• 1958 Ford 2100 Service Manual
• 1964 Ford Truck Model 2100 Service Manual
• 1964 Ford and Mercury Model 2100 Service Manual
• 1965 Ford and Mercury Model 2100 Service Manual
• 1974 Model 2100D Service Manual
• Ford 2100 and 2100D Carburetor Kit Service Instruction Worksheet
  • Adjustments
  • Specifications
• Ford 2100D Carburetor Kit Instructions

Seventy-seven pages (77): includes factory service manuals, detailed specifications, adjustments and illustrations, as well as restoration tips. A must-have for the serious restorer or rebuilder. The most complete resource available!

File Size: 44 MegaBytes
-------------------------------------------------------------------------------------------------------------------------------------
Receiving this document is not meant to infringe on the copywrite laws stated by any legal parties. This is meant to help those of you on FTE that really need it, completely free as a gift from me to you.

This document being posted has been discussed with a forum moderator, in which I have been given the green light to post this thread. Until the time that this thread is deleted, the document will be available upon request by PMing (Private Messaging) me, Aaron-71.

This document was purchased by me, Aaron-71, from www.carburetor.ca . If you have any questions or concerns, just PM me.

All you have to do now is follow this link: http://www.mediafire.com/?88y5eohb6o3eq16

And you can download the carburetor manual yourself!

I would like to give special thanks to "OldStyle" here on FTE for getting my carburetor manual zipped up into a .Zip file and hosting it on RapidShare!

There are no fees/sign-ups on this website. All you need to do is point & click!

I have downloaded the .Zip file myself to check it for viruses, bugs and flaws. There are none!

I will no longer be sending out the carburetor manual via emails, now you can all find the manual yourselves at the link I've posted above.

Here is a picture of what you need to point & click once you click the RapidShare Link above (https://rapidshare.com/files/1895123..._2brl_Carb.zip):



Happy Rebuilding!

Thank OldStyle if you get a chance...

And remember to pay it forward! That's what makes this website the best!

 

hello aaron71
how can i get that manual for the 2100 autolite, can you send to me at www.buickerey64@aol.com ?
can help that to restore the carb on my truck ford f100 1970 . i dont have any idea how rebuild it.
thanks rey

 

It seems that your email address isn't correct. I just tried sending it, and i recieved an instant delivery failure notice. Please post the correct email address and I will try again.

 

Hi AAron 71 Hey just read your post and, if you are still offering to shear the Carburator Manuel I sure would like to have it. My email is jdcron@wmis.net Thanks.

 

No worries. I am definitely willing to share it with anyone on FTE. Thanks for asking in the post, it helps bump it up for others whom want to use it.

I've given it out to around 20 FTE'ers now, and so far all i've had are pats on the back. If you want it, I still am and still will be offering it for a very long time.

All you gotta do is ask .

 

Hey Arron, glad you replied to my request for the Carb manual. Yes I would like to receive the manual, If you would please email it to me at jdcron@wmis.net. Hopfully one day I can return the favor. Thanks.

 

I'll take one.

jagabomatshaw.ca

Jim
CYWG

 

thanks but I don't see where to down load it? Is it in the forms or do you email it to me??

 

I would like it all of the FTE users returned the favour, but I will never ask for one. If someone happens to return the favour one day, that's awesome.

Not quite sure what CYWG means, but you've got one coming your way. Cheers.

You don't download it at all. I send it to you through an email.

In total there should be five emails which were sent to both of you. The document is broken up into these five emails so that it's compatable with me sending it through hotmail.com. The maximum size of email about one fifth of the size of the total document, hense the five emails.

Please read through ONE entire email, as each email is the same with the exception of the attachment for each email. If you have any problems with any of the emails or the information provided by the documents, let me know asap.

So far, I've had nothing but thanks and compliments on the document.

Happy re-building!

Aaron

 

Thanks again. What do you drive, what engine do you have?
I have the 351C2bb with a Edelbrock intake with the Edelbrock 4bb 600 carb.
I have the 2100D I am thinking of putting back on, not sure yet but I still want to rebuild the 2100. So if I come across anything that you might need for your truck or something I will contact you. Keeping your email for that reason. Thanks again.

 

Awesome Thanks dude.

My Ride:
1978 F-150 Ranger Lariat, Regular Cab
2-Tone, Racetrack Trim, Needs Paint
351 Windsor, Needs Rebuild
Rebuilt Autolite 2100 2-Barrel Carb
3-Speed FMX Transmission, Needs Rebuild

 

Sorry about that Aaron-71. I also fly and that is my home airport.

Jim
77 F150 - 400 CI

 

Lol, no problems. I was just wondering what the acronym stood for.

I thought maybe you noticed that I was from saskatchewan and knew of the Saskatchewan Rough Riders. Hense the meaning of CYWG would become, "Can You Wear Green?", for the saskatchewan rough riders. Haha. No worries.

 

The manuals are great, Very good reading for those 2100 Carbs.
THANKS AAron-71

 

So I just went through my 5 document carburetor manual that I broke up for FTE users, and it appears that I had some errors in there that I missed and so did everyone else haha.

Some of the pages were blank with no picture. This was because the pictures for a few of the pages were overlapped and thus, could not print off (both), only one overlapped mess...

I have JUST fixed this problem, and in addition to fixing this little glitch...

I have added in page numbers and a footer to help keep everything in order if any of the users who recieve the manual want to print it off, it's easy to keep track of.

So, here's the update:
--------------------------------------------------
1) Fixed minor picture glitches
- Now all pictures can be viewed, and no pages are blank.
2) Added in pages numbers
- Printing the document will be much easier to keep track of now.
3) Added a footer
- Now the documentation and organization of the manual is much more
clean.
--------------------------------------------------

Sorry to those of you whom I said I'd get the document out to last week. I've been very busy trying to make my life less miserable due to the midterm week I just went through at my university. It wasn't easy, but I made it through... so back to handing out this manual!

Cheers,

Aaron