406 Head Flow
Thread Starter
|
New User
Joined: Jun 2008
Posts: 10
Likes: 0
From: Warsaw, In
406 Head Flow
Guys,
Hopefully someone on here can tell me if they know approximately how much CFM a set of C3AE-C heads have. These heads have 2.02 intake valves and 1.65 exhaust valves. The runners have been cleaned up and the ports were gasket matched. There was no bowl work done because the guy that was suppose to do it was drag racing all the time.
I've been using 240 cfm on my engine calculators trying not to be too conservative while trying not to be optimistic also.
Is there anyone out there that knows what a set of these heads flow or at least with experience give me an educated guess. I'm guessing without the experience. Jim
Hopefully someone on here can tell me if they know approximately how much CFM a set of C3AE-C heads have. These heads have 2.02 intake valves and 1.65 exhaust valves. The runners have been cleaned up and the ports were gasket matched. There was no bowl work done because the guy that was suppose to do it was drag racing all the time.
I've been using 240 cfm on my engine calculators trying not to be too conservative while trying not to be optimistic also.
Is there anyone out there that knows what a set of these heads flow or at least with experience give me an educated guess. I'm guessing without the experience. Jim
Thread
Thread Starter
Forum
Replies
Last Post
JimNolan
FE & FT Big Block V8 (332, 352, 360, 390, 406, 410, 427, 428)
22
Aug 19, 2010 11:42 AM
JimNolan
FE & FT Big Block V8 (332, 352, 360, 390, 406, 410, 427, 428)
1
Jan 31, 2010 06:31 PM
JimNolan
FE & FT Big Block V8 (332, 352, 360, 390, 406, 410, 427, 428)
8
Jan 26, 2010 05:47 PM
fordmodela
Fuel Injection, Carburetion & Fuel System
6
Nov 27, 2007 01:10 AM
LedheadELH
FE & FT Big Block V8 (332, 352, 360, 390, 406, 410, 427, 428)
6
Oct 27, 2006 09:11 PM
