some new work - Ford Truck Enthusiasts Forums



Lightning, Harley-Davidson F-150, Roush F-150 & Saleen F-150 SVT Ford F150 Lightning, Roush, Saleen and other performance F150's

some new work

Reply
 
 
 
Thread Tools Search this Thread
  #1  
Old 05-06-2010, 12:39 AM
BigB BigB is offline
Freshman User
Thread Starter
 
Join Date: Apr 2004
Location: Whitby, Ontario
Posts: 45
BigB is starting off with a positive reputation.
some new work



Hello all,
too long between posts - I've been meaning to take time and share some results from my recent visit to Troyer.
Back in March our family took a cruise out of Florida and I dropped the truck off with Mike, Anita and the gang on the way. There is a long story about the trip back through Virginia - all good but for this post I'll leave it at things took a little longer than planned with the truck & there is nothing to the story I haven't told my wife ;-)
I drive a completely stock looking 2007 BLK FX4 sc long box... The truck started with a dealer installed Roush intcld sc, R off road cat back, Bilstien shocks, & the R front roll bar upgrade. My first upgrade was a mail order tune from Troyer that really woke up the R set up. The next step was the first trip to Mike's shop. We did what has become a well documented set of upgrades: E fan's, 2lb pully, coils and Dynatec long tubes. This hardware with some time on Mike's dyno created a whole new beast. I had the opportunity to take the truck out on a road course with this set up and we had a blast putting down better lap times than stock 07 mustang GT's (automatics) we had rented for some of our guests. The instructors couldn't believe how well the truck handled.
The factory brakes held up well on the track but there is no question, I took a year off them in a day... When they were eventually done I went with the full SSBC set up: 3 piston calipers up front, drilled / slotted rotors all around. Great stopping power and less dust than the factory set up.
I added a Hellwig rear sway bar at the time the brakes were done. This is tricky with a duel exhaust but I love what it's done for the truck.
All the above was done before I pulled up to Mikes shop in my salt encrusted black beauty back in March for my second visit to Troyer.
On the agenda for this visit
  • a new exhaust set up: true duel with an x pipe & MagnaFlow's
  • "SnakeBite"
  • Troyer duel fuel pump up grade
  • "A" pillar gauge pack - to make sure I don't blow up :-)
  • transmission valve body
The results are above - I haven't had an opportunity to do any proper runs but I did set up my Iphone ap for a 2 wheel drive jump off the light at the start of the local toll route - zero to the legal limit (100km) in 5.3... traction is an issue as they say. :-) I'm thrilled with the get up and go for something this heavy. If you are considering the "SnakeBite" upgrade for your blower, you will read / hear about how hard and how fast the torque builds - it is true!
I mentioned a long story earlier - not everything went to plan with this project and I spent a few days in town on the way home from Florida while the team at Troyer worked out the bugs. Some of our troubles were related to the salt we have on the roads up here. But when you are taking a stock set up to where these mods do - things can go wrong. Mike and the team at Troyer are 100% good for their solid reputation - my truck was up on Mike's Dyno for three days solid, after I got there, while they worked none stop to get me back on the road. I know the work was piling up in the parking lot. It is also true that Mike won't let the truck go unless it is right.
I did have the opportunity to better understand than I normally would what we were doing and where some of the problems were coming from. This next round of upgrades was more than "bolt on" - the "SnakeBite" / port & polish of the supercharger is more of the same so to speak (a lot more - it is making over 12lbs of boost) but the fuel pump is a bigger deal.... Do your research - happy to answer any questions if any of the above is on your list. If you know what you are getting into - the results are a ton of fun.
I love my Ford!
cheers,
Reply With Quote
  #2  
Old 05-09-2010, 09:57 PM
Raider50's Avatar
Raider50 Raider50 is offline
Elder User
 
Join Date: Mar 2007
Location: Buffalo, Wyoming
Posts: 705
Raider50 is starting off with a positive reputation.
Wow, that sounds amazing. I always wanted to take our 05 roushcharged to troyer but i just never got around to it. Money was always a concern lol. But those are some real impressive numbers. So how can you shove that much boost into stock internals? I was told that 8psi or so was the "safe" limit. But obviously not, I really envy you and your truck. (i am driving a subaru outback now) So are there any more plans for the truck?
Reply With Quote
  #3  
Old 06-27-2010, 11:19 AM
00Harleydavidson 00Harleydavidson is offline
Freshman User
 
Join Date: Jun 2010
Location: West Plains, Missouri
Posts: 28
00Harleydavidson is starting off with a positive reputation.
Sounds like it is on it's way to be a beast!
Reply With Quote
  #4  
Old 01-24-2016, 09:33 PM
BigB BigB is offline
Freshman User
Thread Starter
 
Join Date: Apr 2004
Location: Whitby, Ontario
Posts: 45
BigB is starting off with a positive reputation.
many year later

Hello F150 community,
well, it's been nearly 180 thousand kilometres and Dodge has yet to pass me ;-) but all good things must come to an end and my mechanic tells me the bottom of cylinder number 8 is gone. I understand 1 and 3 are also down on compression. I think I know when it happened - there is a new underpass / tunnel near my house and dropping to 2nd sounds fantastic... I did that about a month ago and came out limping - it was the beginning of the next phase of my 2007 FX4's life. This truck peeked at nearly 440 HP and 520 torque at the rear wheels... even a year ago she pulled 420 and 500 on a local dyno but alas, the end has come for gen 1. I drove this truck hard from day one. Originally a Roush stage 3, then a Troyer Tuning stage 1 followed a couple or years later with a snakebite / fuel upgrade, this truck never drove an easy kilometer (mile) and we had a ton of fun along the way. I hosted corporate track days and chased BMW M3's around a track and pulled stumps out at the cottage the next weekend - this truck did it all.
Now we need to make a a decision and I've decided to rebuild for the next level as they say. I will post here as decisions are made and hope to take my 2007 sleeper to a whole new level over the next few months.....
This will be a full rebuild and I'm looking for ideas, please share your thoughts and I will post updates as V2 comes together...
Thanks - B
Reply With Quote
  #5  
Old 01-31-2016, 09:23 PM
thzpcs thzpcs is offline
Senior User
 
Join Date: Mar 2014
Posts: 188
thzpcs is gaining momentum as a positive member of FTE.
Sad to hear, but I hope it'll come back bigger and better!
Reply With Quote
  #6  
Old 03-03-2016, 11:00 AM
jsaowole's Avatar
jsaowole jsaowole is offline
New User
 
Join Date: Feb 2016
Posts: 4
jsaowole is starting off with a positive reputation.
Sounds amazing and great to know about this!
Reply With Quote
  #7  
Old 04-19-2016, 09:34 PM
BigB BigB is offline
Freshman User
Thread Starter
 
Join Date: Apr 2004
Location: Whitby, Ontario
Posts: 45
BigB is starting off with a positive reputation.
"Tune up" started

We are underway.
McCulloch Engines
Attached Images
  
Reply With Quote
  #8  
Old 07-07-2016, 06:43 PM
BigB BigB is offline
Freshman User
Thread Starter
 
Join Date: Apr 2004
Location: Whitby, Ontario
Posts: 45
BigB is starting off with a positive reputation.
Slowly buy surely...

Some update photo's
Attached Images
        
Reply With Quote
  #9  
Old 02-08-2018, 08:37 PM
BigB BigB is offline
Freshman User
Thread Starter
 
Join Date: Apr 2004
Location: Whitby, Ontario
Posts: 45
BigB is starting off with a positive reputation.
Hello Ford Truck community, it's been a while again. I have a few updates on my 2007 BLK F150 that I have been posting about since new here. Before I do, I am curious, how many other Ford Truck community members still have there 2007/8 modified Roush / other F150 from new? My very forgiving wife thinks I am crazy, but I just cant give this truck up....

I don't think I've posted since we got back on the road with the remanufactured motor. Sitting on a lot for almost a year while the work was done, was not good for the truck. It was on gravel, but machines need to be used.

Couple of things I learned having a motor rebuilt for the first time.... (coincidently, and painfully for the pocket book, I needed to replace a motor in our RV over the same period - different experience - many of the same lessons) Patience is an absolute must when working with low volume / quality shops.
You can't assume "expert" knows what you want - research is a must
write everything down: scope, expectations, how changes will be managed, changes, warranties - everything... the more there is a "paper" trail, the better your relationship with the shop will be when "stuff" happens.
Patience...

The truck had been back on the road fighting through various electrical / other gremlins until last November.

I did get back to a dyno with the new motor and lower compression... we didn't get around to creating a new tune, but interesting, we got almost the same HP and toque numbers on the lower compression motor as we did when Mike Troyer did his last run with the Truck on the original block many moons ago.

Back in November 17 the truck was really running well - most of the gremlins we out and I was thinking about a new tune for the set up. The truck needed some brake work and when my wife picked it up from the shop she called me on the way home and said it was making a "clicking noise"....

If you follow the threads on this tuck way back you will find stories of my second trip to Mikes Troyer's Shop where we got the full treatment - including the "snakebite" upgraded blower. At the time Mike was working with Stiegemier porting to install "spun up" ported / polished Roush blowers. The "spin" was built into the nose of the blower vs smaller pulleys. Cool idea at the time that provided a bunch of boost while running all the accessories at normal speed.

The "clicking" my wife was hearing, was the gear set letting go.... like the motor before it, the timing sucked, but given how much fun we'd had, I could hardly complain.

I decided to ship the full blower set up back to Stiegemeier where it had originally came from and Bob / the team there were great.

I have a video to share but we are still tracking down some final parts before I can post final pics. The work from Stiegemeier looked so good I wanted to update my old thread....

Reply With Quote
 
 
Reply

Related Topics
Thread Thread Starter Forum Replies Last Post
Monument in Capitol Square will recognize legacy of Native Americans in Virginia FORDF250HDXLT General NON-Automotive Conversation 0 06-26-2017 08:09 PM
2006 FX4 update / dilemma RonF150 2004 - 2008 F150 10 11-02-2016 10:34 AM
Troyer electric fan parts needed RonF150 2004 - 2008 F150 0 09-23-2016 03:22 PM
The BIG DZL Project: 500hp...1000tq...20mpg BIGDZL 6.7L Power Stroke Diesel 115 04-25-2016 08:54 AM
Silver State Run - 2016 (March 18-20) M3dragon Nevada Chapter 2 03-30-2016 01:39 PM


Go Back   Ford Truck Enthusiasts Forums >

Tags
ford, forum, snakebite, troyer, truck, work

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Forum Jump


All times are GMT -5. The time now is 05:41 PM.


We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.