Will 37x13.5 Toyo Mt's on 9''wide wheels clear in the front of an 01 F-350 with Bushwacker Cut-Outs?

 

Has anyone tried a set-up like this? I dont wanna get 35's and have them look tiny, and I would rather not get 37's and then neeed a leveling kit also.

 

What year is your truck? i doubt it. i'm fixing to put on 35's and i have a front end leveling kit. I'm thinking they'll rub a little. i've never heard of anyone being able to fit 37's on any stock truck.

 

Its an 01, and Im sure it would clear 35's with the cut-outs, just Im unsure of 37x13.5's.

 

i'm pretty sure the 37s will rub

Scroll down to a thread below, its on page 1 of the superduty section that you're already in and its called something like new lift and tires. It has pics of a 350 with 4inch lift with 35s and looks great i think. From what i have seen 33-35 with leveling kit and 35-36 with 4-4.5 inch.

 

if you dont have a lift or leveling kit, you will have trouble fitting 35's. especially since you have leaf springs. what size tires are your running now?

 

I think you guys are missing the OP's comment that he's going to be using Bushwacker cut outs.

I know I've seen some other trucks on here that are running the cut outs. Let me search a bit and see if I can dig up those threads.

 

I'm not sure if 37s will fit with cutouts, it'll be close. I know TANKS250 runs 41s with a 4.5" and cutouts. IIRC he ran 36s with a stock suspension and cutouts, his trucks an '05 though.

 

BINGO! Here are pics of Tank 250's truck...

Pictures by TANKS250 - Photobucket

 

Check this post out (this is on an '05 though, no leafs!):

https://www.ford-trucks.com/forums/8...ml#post7545487

Maybe PM Furian and find out where he got his info from?

Another thread by Furian with some more data/pics.
https://www.ford-trucks.com/forums/8...-required.html

Check out this users rig (FAR from stock, but cool nonetheless):
Ford Truck Enthusiasts Forums - thado's Album: Thado ForMog

Do a search on Bushwacker Cut outs, lots of threads out there.

Nevermind, Furian responded here!

 

Here is a pic of Tank 250's truck with 36" tires on stock suspension. You need to be concerned with back spacing of the wheels to avoid rubbing the front leaf springs... you're not going to rub the fenders.

 

i was more talking about rub on the leaf springs. 05 and up has coil overs gives more clearance.

 

Like i said theyll rub on your leaf's. Unless you get spacers. Not good for your hubs though.

 

Check out this thread regarding back spacing...

https://www.ford-trucks.com/forums/8...for-wifey.html

 

Thanks alot guys! Its gunna be a few months, but there will be a build thread on here before too long!