Converting the 1999 to 2007 Tailgate to an 2008-2010 w/pictures and instructions
#62
Well, I have a 2012 Tailgate (no step) on it's way to Alaska! It is the metallic black, so I will have to paint it gloss black to match, but it is a cream puff!
Does any one know if the later hing will still work with the earlier tailgate? I would like to keep my 2002 bent gate for haling rocks and firewood, then put the 2012 on when not hauling stuff...
Thanks!
Garry in Alaska
Does any one know if the later hing will still work with the earlier tailgate? I would like to keep my 2002 bent gate for haling rocks and firewood, then put the 2012 on when not hauling stuff...
Thanks!
Garry in Alaska
#64
#65
torsion spring adjustment?
I was wondering if anyone knows of a way to adjust the torsion spring inside these new tailgates? My new 2014/15 gate feelverity heavy compared to my 2005 tailgate with the aftermarket spring installed, I may just double it up if I can't adjust the internal one.....
#66
#67
subscribed, awesome thread and id love to do this! problem is these things are precious in my area compared to the prices other areas on fte have. i was looking at about 800 for an 08 one. and it wasnt even the same color as my truck LOL! if anyone knows links to buy one on ebay thatd be great!
#70
subscribed, awesome thread and id love to do this! problem is these things are precious in my area compared to the prices other areas on fte have. i was looking at about 800 for an 08 one. and it wasnt even the same color as my truck LOL! if anyone knows links to buy one on ebay thatd be great!
#72
First off SORRY to resurrect an OLD thread.
A couple of years ago I bought an '11-'16 gate for my L99.
My truck has a custom paint scheme that was done by a conversion company when new and the '11-'16 ("2 line") gates wouldn't work with it.
Just yesterday I found and bought an '08-'10 ("1line") gate so I think I'm set.
Its just a plain gate with no step or camera-I have a topper so I can't utilize the step anyway.
I was reading through these OLD posts and someone asked if ALL the '08-'16 gates have the built in torsion bars and I don't believe there was an answer......anyone know for sure?
AND, Is there any adjustment on these torsion bars?
Also, Does anyone know if the plastic bedliner piece from a '99-'07 will fit the newer gates? -the one on the new gate I bought is a little rough.
I am going to install my new gate onto my truck before it goes into the body shop for some other repairs so they can match my custom paint on it.
Thanks! & SORRY again for resurrecting such an old thread Guys!!
A couple of years ago I bought an '11-'16 gate for my L99.
My truck has a custom paint scheme that was done by a conversion company when new and the '11-'16 ("2 line") gates wouldn't work with it.
Just yesterday I found and bought an '08-'10 ("1line") gate so I think I'm set.
Its just a plain gate with no step or camera-I have a topper so I can't utilize the step anyway.
I was reading through these OLD posts and someone asked if ALL the '08-'16 gates have the built in torsion bars and I don't believe there was an answer......anyone know for sure?
AND, Is there any adjustment on these torsion bars?
Also, Does anyone know if the plastic bedliner piece from a '99-'07 will fit the newer gates? -the one on the new gate I bought is a little rough.
I am going to install my new gate onto my truck before it goes into the body shop for some other repairs so they can match my custom paint on it.
Thanks! & SORRY again for resurrecting such an old thread Guys!!
Thread
Thread Starter
Forum
Replies
Last Post
keyul
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
23
07-11-2017 08:53 PM
jmadsen
1948 - 1956 F1, F100 & Larger F-Series Trucks
29
01-15-2017 06:39 PM
The Tiger
1999 to 2016 Super Duty
13
02-25-2016 07:59 AM