I am close to done on my project and getting down to the final items. Is there anywhere at this point to get exhaust hangers?

I have a reproduction kit for the exhaust system itself for the 226 6cyl, but need to be able to mount it. I dont want to use the universal hangers, plus most seem like they won't work anyway.

 

Here is a good thread with information on these parts:

21C-5259 Bracket (muffler outlet pipe) Front
7HC-5259 Bracket (muffler outlet pipe to frame) Rear
7HC-5261 Bracket (muffler outlet pipe) Rear

All of these were superseded by TAAA-5260-A of which there is an internet listing: https://nospartsltd.com/product/taaa5260a/



https://www.ford-trucks.com/forums/1...r-hangers.html

 

I looked at most of the threads and saw those drawings. I am working with someone to make them, but I am not sure if that will work out and when.

 

I edited my post and added some cross reference part numbers that valid into the 80's

 

Just to confirm, I can go with 3 of the TAAA-5260-A? that site has limited info.

 

Ive found that some of them are very similar to the ones that 3rd Gen Auto sells for the early Ford V8's.

 

According to my Ford books, the three distinct original part numbers were all superseded by the same TAAA-5260-A. It seems to me that it should be expected they may need some bending/tweaking to fit the various locations as the originals were manufactured with different bends contributing to their unique part numbers.