PHP - REMOTE FICM REPROGRAMMING!
#1
PHP - REMOTE FICM REPROGRAMMING!
We are happy to announce that in February, customers will no longer have to send their FICMs to us to be reprogrammed -- and no more down time for your trucks!
(Imagine the savings in shipping costs alone! )
The cost of reprogramming will remain the same -- $150. A $250 deposit will be required, however, to cover the cost of the programmer. The deposit will be 100% refundable if it is returned to us undamaged.
Each programmer will be set up to program ONE vehicle; however, if there are several people in one area who would like to reprogram their FICMs, Bill can reset the programmer remotely to allow it to program additional vehicles.
IF YOU ALREADY HAVE A 6.0L GRYPHON/EVOLUTION, NO DEPOSIT WILL BE REQUIRED -- WE CAN REMOTELY SET UP YOUR PROGRAMMER TO REPROGRAM YOUR FICM! WHEN THE PROGRAMMING SESSION HAS ENDED, WE WILL REMOTELY RESTORE YOUR GRYPHON/EVO TO ITS ORIGINAL STATE!
Bill will also be able to set up applications for dealers to reprogram FICMs, too. Please call us to discuss pricing.
We do not have an exact release date as of yet, but rest assured that as soon as it's available, we will make announcements on our website and forum and on the forums which we sponsor.
(Imagine the savings in shipping costs alone! )
The cost of reprogramming will remain the same -- $150. A $250 deposit will be required, however, to cover the cost of the programmer. The deposit will be 100% refundable if it is returned to us undamaged.
Each programmer will be set up to program ONE vehicle; however, if there are several people in one area who would like to reprogram their FICMs, Bill can reset the programmer remotely to allow it to program additional vehicles.
IF YOU ALREADY HAVE A 6.0L GRYPHON/EVOLUTION, NO DEPOSIT WILL BE REQUIRED -- WE CAN REMOTELY SET UP YOUR PROGRAMMER TO REPROGRAM YOUR FICM! WHEN THE PROGRAMMING SESSION HAS ENDED, WE WILL REMOTELY RESTORE YOUR GRYPHON/EVO TO ITS ORIGINAL STATE!
Bill will also be able to set up applications for dealers to reprogram FICMs, too. Please call us to discuss pricing.
We do not have an exact release date as of yet, but rest assured that as soon as it's available, we will make announcements on our website and forum and on the forums which we sponsor.
#2
Thanx i am looking forward to this.
does the pcm have to be flashed or changed?? does the CEL go on??
what were the gains?
does turbo lag go away or improve and throttle response get better?? i have a 07 and my throttle response is bad and my turbo lag is also bad. i currently have th new flash form ford.
does the pcm have to be flashed or changed?? does the CEL go on??
what were the gains?
does turbo lag go away or improve and throttle response get better?? i have a 07 and my throttle response is bad and my turbo lag is also bad. i currently have th new flash form ford.
Thread
Thread Starter
Forum
Replies
Last Post
Rogel Ford
Vendor Specials, Discounts, Product Announcements & Group Buys
0
06-08-2015 12:06 PM
Rogel Ford
Vendor Specials, Discounts, Product Announcements & Group Buys
0
06-08-2015 11:59 AM
RedlineGoods
Vendor Specials, Discounts, Product Announcements & Group Buys
9
05-24-2015 01:26 AM
5 Star Tuning
Vendor Specials, Discounts, Product Announcements & Group Buys
2
09-27-2012 01:36 PM
Groovy Chick
Vendor Specials, Discounts, Product Announcements & Group Buys
3
10-30-2009 04:12 PM
2004, f250, ficm, flash, ford, php, program, programmer, programming, remote, reprogram, reprogramming, sct, tunes, xcal3