When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Mike, just like Chris said: Check each cylinder compression. If its holding good compression and the bearings aren't knocking, just replace the gaskets.
Afternoon all!
Originally Posted by liftnw8z
I hear ya man. Knowing what's wrong is the generally the hardest part.
1800 for a remanned engine...wow. If it comes down to it, want me to troll a couple yards up here to see if they have any decent 300's around? Might be able to find you one, but no promises.
Originally Posted by cbradford
Mike before condemning rings it would be a good idea to perform a compression test.
I'll do a compression test this weekend. I'll be honest it doesn't even start hard so i don't think the compression is that low. And i dunno what's up but after installing the catch can there's really not a whole lot of blowby cause there's barely any in it so far.