Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: 4WD Guides
- How to Replace Transfer Case
Step by step instructions for do-it-yourself repairs
Browse all: 4WD Guides
Transfer case chain replaced or rebuilt
#31
#32
Transfer case problem
My 06 ranger is doing the exact same thing for some time now and i haven't been able to source out the problem. Recently i was trying to pull out of an inclined snowcovered driveway. I switched into 4high and proceeded to pull out slowly. Here comes the clunk from down under and my truck slips back into 2wd; i let off the throttle for a sec then throttle again and its back in 4high just long enough to get out then clunk again. Today i replaced the shift motor and pulled the front driveshaft off for inspection. Everything looked good. Still clunking.
Thread
Thread Starter
Forum
Replies
Last Post
urbex
Pre-Power Stroke Diesel (7.3L IDI & 6.9L)
6
02-01-2017 01:20 PM
jason832
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
2
09-21-2016 08:45 AM