Hi,

I want to know from anyone that has installed the MAF kit from a company called IST Sales (Interactive Systems & Technologies Mass Air Home Page)

1) I want to know if the stuff is any good.
2) If the conversion is straight forward. (i know my way round autos and electronics)
3) I also want an opinion on the company backup?

Thanks

 

Ouch! Those Truck conversion kits are pricey.

 

- If you have a Ford Racing B303 or E303 Cam: From our experience, virtually every engine with a Ford Racing B303 or E303 Cam runs way too rich due to the improved breathing/airflow through the engine. The Air Adjuster!! is the perfect solution!! You'll be able to dial your engine right in.
- If you have a long-tube headers: From our experience, almost all engines with long-tube headers run way too lean due to the improved airflow/exhaust through the engine. The Air Adjuster!! is the perfect solution!! Compensate for that too lean condition easily!!




haha. looks like the combination of these two parts is just right. funny they would say these two things next to each other.

 

I have no experience with them nor heard of anyone who has. Personally I am not that impressed. Appears like a lot of sales talk, but nothing technical on their site. I'll keep my hard earned cash to myself.

 

I have never used there stuff . Check out Pro M Racing , i have used there mass air meters for years , very good meters . They are custom tuned to your applacation & come with a flow & tune sheet. They have everthing you need to make the swap ... Lew