Post up some pictures of your 4x4 trucks
#48
Thanks for the nice comments! Benmoderow my truck is has a 4" lift. I am acctually looking to replace the rear leaf springs in the next couple of months. I started a seperate thread on that if you have any input... lol.
Tscott77 THANKS! Can't take credit for all but it's still in progress.
Tscott77 THANKS! Can't take credit for all but it's still in progress.
#51
#52
Thanks for the nice comments! Benmoderow my truck is has a 4" lift. I am acctually looking to replace the rear leaf springs in the next couple of months. I started a seperate thread on that if you have any input... lol.
Tscott77 THANKS! Can't take credit for all but it's still in progress.
Tscott77 THANKS! Can't take credit for all but it's still in progress.
What tire size 33s?, and a 77 is 2 inches higher in stock than a 79, so a 79 needs a 6 inch lift for that stand , is that right !?
#54
#55
Was this question directed to me? If so, I got them from eBay, but I haven't seen any more auctions for them. As a matter of fact, I ended up getting my front turn signal lenses from LMC Truck. If I can track down the seller, I will post back with his eBay user name.
#56
I found the user name for the guy that has the clear tails. Just go to eBay and do an advanced search for the user name "memoimports." He currently has an auction for them and he has four sets left. He also has the side markers. I overall was happy with my purchases, but the side markers did require some trimming to get the bulb sockets to fit which was no big deal to me. The tail lights were a perfect fit.
#57
I'm running Mickey Thompson Baja Claw 35x12.50's on 17 inch rims. My 77 is not a highboy, manufactured in 5/77, married transfer, 133 wheelbase and no gas tank behind the seat...so i believe the 4 inch lift should put a 78 or 79 model year at the same stance.
#58
I found the user name for the guy that has the clear tails. Just go to eBay and do an advanced search for the user name "memoimports." He currently has an auction for them and he has four sets left. He also has the side markers. I overall was happy with my purchases, but the side markers did require some trimming to get the bulb sockets to fit which was no big deal to me. The tail lights were a perfect fit.
#59
Blacked out light trim and grill
I have seen the thread for the 2wd guys, well here is a thread for us 4wd guys to post pictures of our trucks in. Here are some pictures of my truck. Its getting a set of ford valve covers to replace the crappy leaking chrome ones. Don't tell me how crappy the body is, all the rust has been fixed with new metal but there is a ton of puddy. Some day I'll get a nice body from down south to set on top of this frame.
#60