Entering Engineer Mode on your message display
#1
Entering Engineer Mode on your message display
Did you know...That if you hold the reset button down while turning the key to on that you will enter the engineer mode.
Dianostic display on your message center. Tests all the guages and things. Played with it a little not sure if you really could read any check eng codes or anything but kind of interesting.
Have to play with it somemore and see if it of any real use.
Dianostic display on your message center. Tests all the guages and things. Played with it a little not sure if you really could read any check eng codes or anything but kind of interesting.
Have to play with it somemore and see if it of any real use.
#6
#7
Thread
Thread Starter
Forum
Replies
Last Post
76f350spercamprspeal
Picture competitions
4
09-23-2012 09:34 PM
mikespecht
6.7L Power Stroke Diesel
11
06-13-2011 09:36 PM