C6 Shift kit
Thread Starter
|
Senior User
Joined: Feb 2009
Posts: 142
Likes: 0
C6 Shift kit
Was thinking of getting a B&M shift improver kit for my F250 with 351. I was wondering if anybody has one in theres? If so how did you like it and how hard is the install. Also wondering what that drill bit in the kit is for.
Postmaster
Joined: Jan 2009
Posts: 4,558
Likes: 2
The B&M shift kit is a big improvement over stock . There not hard to put in , just read the instructions good !! The drill bit is in the kit because some of the holes in the plate that goes between the valve body & trans need to be inlarged . The bitts arn't very good so be carfull or they will break .... Lew
Posting Guru
Joined: Dec 2006
Posts: 1,639
Likes: 2
also get an r-code servo
i have a c6 with an r-code servo and a tci full manual valvebody (basically the same as a shift kit) and a boss hog torque converter living behind a 700hp nitrous motor that is street driven but only has 450hp without the bottle
i have a c6 with an r-code servo and a tci full manual valvebody (basically the same as a shift kit) and a boss hog torque converter living behind a 700hp nitrous motor that is street driven but only has 450hp without the bottle
