When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I understand your boss doing that 2fords. Taught that guy a lesson! When I first got mine, 1 of my guys went to dump and forgot the chipper was on the back! Bent the hell out of the shoot. So I made him help me replace it and hand file all of my welds
Ah! That's better! Well, it took a lot of patience but this one has been saved from the scrapper! It is a 1957 F600 that originally came with a 272, 2v. 4 speed Warner transmission and an Eaton 2 speed rear end. It will need an engine rebuild but it does run, drive and stop!
Last edited by DBrawley; 01-25-2017 at 02:48 PM.
Reason: Addition to content
We've got a 91 4x4 F700 at work with the 7.0L gas engine. It's only got a little over 60k miles on it. I've driven it from Alabama to Colorado twice and to California screaming at about 4200 rpm the whole way.
Here it is in Minnesota last winter. That job sucked.