XE262H Cam ignition timing question
#31
"I think putting your beer down is a good idea"
NOOO, It wasnt...I ran out. Barry_R said what I wanted to say..but I wasnt nice. I was pulling your chain. This was a after market question,(XE262H Cam ignition timing question) which is different than stock. Please read other posts of mine. I have the "cam kit" installed. I seeked advice, not schooling. I read your post then saw your stock breather hacked together (I thought it was a joke) ...well... have you ever read the issues with air flow over a carb with and without high performance breathers? I about crapped myself when I saw your "ram air" pictures. "It dont" work that way sir, flow dynamic's from a book be damned. A dyno comes to mind..As you stated earlier, I didnt think it needed explaining here, for knowledgeable people giving advice anyway.
Rider
NOOO, It wasnt...I ran out. Barry_R said what I wanted to say..but I wasnt nice. I was pulling your chain. This was a after market question,(XE262H Cam ignition timing question) which is different than stock. Please read other posts of mine. I have the "cam kit" installed. I seeked advice, not schooling. I read your post then saw your stock breather hacked together (I thought it was a joke) ...well... have you ever read the issues with air flow over a carb with and without high performance breathers? I about crapped myself when I saw your "ram air" pictures. "It dont" work that way sir, flow dynamic's from a book be damned. A dyno comes to mind..As you stated earlier, I didnt think it needed explaining here, for knowledgeable people giving advice anyway.
Rider
#32
#33
I thought I could comment how I wanted on this forum? Let me know if this has changed, please? Do I have the right to say what I want or should I get approval before I post? Help me understand because, apparently kennewick you don't like the comments that I have made. About digging up old dead roads and seems to be a habit? I was commenting to ridermans remark about the ram air pictured. If you are referring to old posts, I have not read all of them. If not could you explain your remark to me a little more clearly so, I can understand what is the problem with my posts? I tell you what, could you E- mail me at my home address so we don't go back and forth and slam each other on this forum and may come to a understanding? I would rather you and me discuss this and not tie up the forum with negative comments, that applies to both of us. I would like to resolve our differences off the forum if possible, zrxlover? My E-mail address is: zrxlover@att.net
#34
I thought I could comment how I wanted on this forum? Let me know if this has changed, please? Do I have the right to say what I want or should I get approval before I post? Help me understand because, apparently kennewick you don't like the comments that I have made. About digging up old dead roads and seems to be a habit? I was commenting to ridermans remark about the ram air pictured. If you are referring to old posts, I have not read all of them. If not could you explain your remark to me a little more clearly so, I can understand what is the problem with my posts? I tell you what, could you E- mail me at my home address so we don't go back and forth and slam each other on this forum and may come to a understanding? I would rather you and me discuss this and not tie up the forum with negative comments, that applies to both of us. I would like to resolve our differences off the forum if possible, zrxlover? My E-mail address is: zrxlover@att.net
Have a nice day.
#35
Thread
Thread Starter
Forum
Replies
Last Post
hivoltj
335 Series- 5.8/351M, 6.6/400, 351 Cleveland
13
05-15-2016 06:01 AM
Munch
335 Series- 5.8/351M, 6.6/400, 351 Cleveland
5
04-11-2012 10:39 PM
Azguy54
FE & FT Big Block V8 (332, 352, 360, 390, 406, 410, 427, 428)
16
11-01-2011 07:27 AM
77custom408
Small Block V8 (221, 260, 289, 5.0/302, 5.8/351W)
9
09-30-2008 09:35 PM