Road Armor Bumper!!
Thread Starter
|
Freshman User
Joined: Jan 2008
Posts: 29
Likes: 0
From: Birchwood, Wisconsin
Road Armor Bumper!!
Hey I just installed a road armor front bumper on my 03 F-350, and I'm going to install 4 PIAA lights i'm going with 2- PIAA 540's for my fog lights and 2- PIAA 510's for driving lights as i had to get rid of my stock fog lights I was wondering if i can still use the stock fog light wires as it would be nice to just pull the switch and on come my fogs is the wire going to handle the extra wattage or am i going to have to beef it up. Or could i split the wire to handle all 4 lights?
I have another question reguarding my road armor bumper. It seems most superduty pictures i've seen with the road armor bumper you cannot see the factory crossmember up front but in mine it hangs out the sides of the bumper. Is the bumper strong enough that you don't need the front crossmember? its 3/16 inch steel.
I have another question reguarding my road armor bumper. It seems most superduty pictures i've seen with the road armor bumper you cannot see the factory crossmember up front but in mine it hangs out the sides of the bumper. Is the bumper strong enough that you don't need the front crossmember? its 3/16 inch steel.
FTE Leadership Emeritus
Joined: Sep 2000
Posts: 23,174
Likes: 1,678
From: Stephensville WI
The stock wire probably won't safely support the wattage of the 2 PIAA lights. What you can do is have the stock fog light wires feed a relay, which then powers the lights.
Thread
Thread Starter
Forum
Replies
Last Post
Mdavidson1974
Excursion - King of SUVs
0
Nov 2, 2016 09:26 AM
thexman
1999 - 2016 Super Duty
22
Mar 14, 2010 09:59 AM
