How to change head gasket on 79 Ford 300?
#1
How to change head gasket on 79 Ford 300?
Well decide use that truck for plow due 4wd.
Last winter it blew head gasket due overheat because hose were clog by ice.
It still run but when it get real hot it smoke white plus see coolant bubble around head to block.
Need know what good rpm stay under 2500? Understand it real slow in reverse like 10 mph= 2,500 rpm since I use several truck with automatic could go 30 mph with rpm at 2,500
Last winter it blew head gasket due overheat because hose were clog by ice.
It still run but when it get real hot it smoke white plus see coolant bubble around head to block.
Need know what good rpm stay under 2500? Understand it real slow in reverse like 10 mph= 2,500 rpm since I use several truck with automatic could go 30 mph with rpm at 2,500
Thread
Thread Starter
Forum
Replies
Last Post
karjunkie
FE & FT Big Block V8 (332, 352, 360, 390, 406, 410, 427, 428)
6
03-22-2016 09:04 PM
Tahnka
Pre-Power Stroke Diesel (7.3L IDI & 6.9L)
7
05-10-2011 05:54 PM
mOROTBREATH
1948 - 1956 F1, F100 & Larger F-Series Trucks
27
01-13-2011 05:53 PM
cdj
Conventional (Bumper Pull) Towing; Travel Trailers & Pop-ups
3
07-15-2004 07:35 AM