I posted these a while back, I forget how much though. I've got some Hooker long tube headers that were supposed to fit on my 78 bronco (351M) but turns out, they don't. I believe I had them up here for something like $200, I don't know. At this point I'll take offers. They are "new" as in, I never installed them. I tried but they didn't fit. I put a light coat of header paint on but it didn't stick too well (cold conditions). They are still in the box, they have 3 inch collectors to bolt on to and the hardware it came with, gasket, bolts etc.

I'll consider almost any offer.


Secondly, we have a 302 block from a 74 Maverick that we got free. My mom and little sister tore the block down and I had NAPA magnaflux the block and clean it. Well, they didn't clean it too well and the is a hole about the size of a quarter near the distributor hole. It goes into the valley between the heads. I doubt it can be used so we are getting rid of that as scrap, the heads might be good, I didn't get them checked. We also have all the guts to go with. I paid about $80 for the machine work so I'd like to get that back for all of it. Probably worth more in scrap.

I can pictures of the headers or the block and parts, just let me know.

 

79F150400 I sent you a PM, can meet you as soon as Monday evening in Everett with the carb.

Yahiko, firts time I've been on in a while, will have to check when the meet is. Working 5 10s in Mukilteo and have to move from Lacey to downdown-ish Olympia by the end of the month so I have been and will be BUSY.

Anyone want a Weber 2bbl?

 

Here's some random parts taking up space in my storage shed. If anyone wants any of it let me know:

Stock intake and exhaust manifolds, air cleaner assembly, and one bbl carb (may need work); all from a 300 six.
Bench seat (vinyl is ripped but the frame and foam are still solid)
A pair of Canyon red visors.

All of the above were pulled from a 1986 F-150.

 

Do we have a place where I can list some non Ford truck stuff
like a DVD player that is looking for a new home?



Sean

 

i have two 69 f-250 for sale one is a factory flat bed the other is a camper special with overloads call at 509-560-569-2228 make offer .they both need work.

 

We do now.
https://www.ford-trucks.com/forums/1345514-non-ford-related-sales-trade.html#post14808783

As long as the Mods don't mind.

 

I'm currently shopping around for a pair of bucket seats to put in my truck. Ideally I'd like to have a pair of captains chairs that were an option in the 78-79 BB, but they're hard to come by.

I like the look of period correct and vintage seats better than newer ones, so something like from a 60's-70's car. Mustang high back seats are nice.

Just keeping an eye out for what people might have. I'd prefer black


Thanks
Jameson

 

Why not the new ones from the Super Duties some thing like what is in
my truck? They are high back and not the tall pull up head rest style.
Lots to pick from here.
I-5 Auto & Truck Parts https://plus.google.com/105821451388...ut?gl=us&hl=en


Sean

 

Not a huge fan of how the newer model seats look in these trucks. Often they're also on the more expensive side too.

While bucket seats will not be stock, I'd like to keep a relatively stock look

 

You still might want to check out that yard.



Sean

 

Bought a load of poo from an old warehouse that is moving. Will have a lot of nos plug wire kits, battery cables, voltage regulators, and a bunch of other random junk as I sort through it. Going to list the easy stuff for now. Everything is OBO

(2) rebuilt quadrajet carbs. $200 each
Rebuilt 2 barrel Holley off a 68-70 Ford 361 $125
(2)Brand new weber K8456 conversion kits for a pinto $250 each
Have some other new weber kits for corolla, cellica, Datsun, bmw, vw, ask if you're looking for one

 

Hey Lucky, did you get a negative battery cable for a '90 F150? It's the style that has a clamp around the cable midway down that bolts to the frame and then on to the block.

 

I'm looking for a motorcraft 2150 carb. A parts carb would be great. I'm mainly looking for the brass main well tube that is attached to the inside of the air horn. The carb off of my 75 360 fe is missing. If anyone has a carb laying around or anyone knows of other options I may have, let me know. Thanks.

 

I have one rebuildable carb. I will be home this afternoon if you still need one. PM me

 

I do need one still. Either I can't figure out how to PM or I don't qualify yet since I just joined yesterday. Are you able to PM me?