WAFTE Archived Buy/Sell/Trade ADs
#256
Good running ?how many miles , and would you consider trades? Have a rebuilt truck 302 with zero miles with a Weiand 4bbl intake GM style HEI distributor or Duraspark II distributor1966 timing cover but have newer timing covers for newer applications if you need one.Early 70's type 302
But no i not interested in any trades she wants it gone ,it runs fine , and has about 220k on it 4x4 all wheel drive has a few new parts like front axle ,tires
heres a pic
#257
73 F250 4x4 and parts!!
Sold the truck but the buyer didn't want the rust free doors or fender, so those are available. I also have a passenger's side fender (aftermarket and has surface rust from not being painted), a hood, three grill shells, 76-77 grill inserts and a bunch of other misc parts. PM me for details, include an email address and I can send pictures, and make an offer...these really need new homes.
Ivan
Ivan
Last edited by ford005; 03-13-2013 at 10:55 PM. Reason: sold it
#258
81 Bronco
I also have a 1981 Bronco for sale. I got this as a basket case a few years ago and have slowly been putting it together. Here is my CL ad for it as well: 81 Bronco lifted on 35's
Just about everything is in the ad and I don't want to regurgitate it here. I'm open to offers, trades and parting it out. I wouldn't mind keeping the engine for my 79 shortbed project and the front suspension/axle for my Mountaineer project, but those aren't deal breakers. I have a bunch of other parts available as well.
Give me a call or text if you have any questions.
Ivan
Just about everything is in the ad and I don't want to regurgitate it here. I'm open to offers, trades and parting it out. I wouldn't mind keeping the engine for my 79 shortbed project and the front suspension/axle for my Mountaineer project, but those aren't deal breakers. I have a bunch of other parts available as well.
Give me a call or text if you have any questions.
Ivan
#259
1997 Explorer 5.0 AWD
Ok, I have another one: 1997 Ford Explorer 5.0 AWD sell trade
Just so everyone knows why I am selling this stuff; I had planned on staying in Washington the rest of my life, but I will be transferring to San Diego in 6 months and I don't know if I will be coming back after that or if I will be gone for the next 4 years, so I'm liquidating and just keeping what I really want.
Anyways, I have a 97 Ford Explorer that has been my daily driver for quite a while. Most of the info is in my CL ad, but I tried to keep it short and sweet. She's a good truck and has been completely dependable. My buddy had it for years before I got it from him. Bunch of new or newer parts on it, but it does have an intermittent CEL related to the EVAP system. I haven't looked into it too much, but it comes and goes without changing anything.
I would like to get $2250 for it, but willing to make a deal for a fellow member. Give me a call or text if you have any questions.
Ivan
Just so everyone knows why I am selling this stuff; I had planned on staying in Washington the rest of my life, but I will be transferring to San Diego in 6 months and I don't know if I will be coming back after that or if I will be gone for the next 4 years, so I'm liquidating and just keeping what I really want.
Anyways, I have a 97 Ford Explorer that has been my daily driver for quite a while. Most of the info is in my CL ad, but I tried to keep it short and sweet. She's a good truck and has been completely dependable. My buddy had it for years before I got it from him. Bunch of new or newer parts on it, but it does have an intermittent CEL related to the EVAP system. I haven't looked into it too much, but it comes and goes without changing anything.
I would like to get $2250 for it, but willing to make a deal for a fellow member. Give me a call or text if you have any questions.
Ivan
Last edited by ford005; 03-20-2013 at 11:00 PM. Reason: reduce price
#260
73-97 parts
Alright, last one...
I've got quite a collection of parts up for grabs. Check out the ads and let me know if you are interested in anything. I don't have pictures of everything, but can send you some. Again, willing do wheel and deal for fellow members and would really like this stuff to go to use and not get scrapped.
1973-1979 8' ford truck bed & tailgate
Ranger Tailgate
Ford Truck doors 1980-1997
Ford Truck fenders 80-97
95 Ford 5.0L engine
92-97 Ford grill/lights/bumper
Ford Intake manifolds and carbs
These are just the major items...I have a bunch of other stuff I haven't listed, just don't have time for all that, but ask and I will let you know if I have it. Completely open to offers and will do better than any salvage yard...tell me what you want and what you can spend and I will probably say OK. I can help deliver the larger items if you need it.
***I've got a deal in place to deliver some parts to Opossum in Renton in the next few weeks...if anyone wants some parts, I'd be more than happy to bring stuff down and meet up along the way.
I'd also be interested in trading for some tires with at least 50% tread: set of 4 33x12.50R15 33x10.50R15 32x11.50R15 31x10.50R15, set of 4 255/85R16 285/75R16 305/70R16 315/75R16, a pair of 33x12.50R15 directional mud terrains (like baja claw, procomp xtreme m/t, geolander m/t), a pair of 75% or better 285/75R16 BFG A/T or the like***
I've got quite a collection of parts up for grabs. Check out the ads and let me know if you are interested in anything. I don't have pictures of everything, but can send you some. Again, willing do wheel and deal for fellow members and would really like this stuff to go to use and not get scrapped.
1973-1979 8' ford truck bed & tailgate
Ranger Tailgate
Ford Truck doors 1980-1997
Ford Truck fenders 80-97
95 Ford 5.0L engine
92-97 Ford grill/lights/bumper
Ford Intake manifolds and carbs
These are just the major items...I have a bunch of other stuff I haven't listed, just don't have time for all that, but ask and I will let you know if I have it. Completely open to offers and will do better than any salvage yard...tell me what you want and what you can spend and I will probably say OK. I can help deliver the larger items if you need it.
***I've got a deal in place to deliver some parts to Opossum in Renton in the next few weeks...if anyone wants some parts, I'd be more than happy to bring stuff down and meet up along the way.
I'd also be interested in trading for some tires with at least 50% tread: set of 4 33x12.50R15 33x10.50R15 32x11.50R15 31x10.50R15, set of 4 255/85R16 285/75R16 305/70R16 315/75R16, a pair of 33x12.50R15 directional mud terrains (like baja claw, procomp xtreme m/t, geolander m/t), a pair of 75% or better 285/75R16 BFG A/T or the like***
Last edited by ford005; 03-09-2013 at 11:04 PM. Reason: Delivery options!!
#261
I'm parting 2 trucks, both are in my sig.
88 F250LD 4.9, 4speed, 2WD Reg Cab. I took the bed, the engine is spoken for. VERY strait and rust free red body. Very base model, plain grey interior. Much of the rest is still there.
89 F250HD 4WD 7.3 IDI high miles, might be rebuildable, Blue, good fenders and fixable Ex-cab. Blue interior. Good HD TTB. This one is about half gone.
PM me is you need anything.
88 F250LD 4.9, 4speed, 2WD Reg Cab. I took the bed, the engine is spoken for. VERY strait and rust free red body. Very base model, plain grey interior. Much of the rest is still there.
89 F250HD 4WD 7.3 IDI high miles, might be rebuildable, Blue, good fenders and fixable Ex-cab. Blue interior. Good HD TTB. This one is about half gone.
PM me is you need anything.
#262
I have a 1973 Highboy that's up for sale. I picked it up for a decent price to save it from the scrapper. I had intended to fix it up, but plans have changed and it needs to find a new home.
4 barrel 390, 4 speed, 205 t-case, 33's on aluminum slots. It runs well and drives, but the rear pinion is a little loose. I tightened it up, but it looks like the bearings are worn and it would need more time and energy than I really want to put into it.
It has rust in the cab corners, the a-pillars, and a little in the driver's floor (but it is structurally sound). The doors and the driver's side fender have the typical rust as well. I have the lower half of a rust-free cab (was rolled), two rust free doors and a rust free driver's fender available. The windshield has a crack, but I have a replacement for that too. It is missing the front driveshaft.
I have a bunch of other parts too...a 76 F150 4x4 parts truck with another 390, C6 and married 203, Edelbrock Streetmaster intake, finned valve covers, and other misc parts. Also a complete 79 F150 4x4 chassis.
I'm looking to get about $1500 for the truck itself, and am willing to wheel and deal on a package if you want to fix it up or swap the body onto a half ton frame. I'm also open to trades or parting it out, but the major items would need to go first. I have a truck & trailer and can deliver.
Here is my CL ad: 1973 Ford F250 4x4 sell trade
I'm in Oak Harbor on Whidbey Island. Call or text me if you want any more info.
Ivan
4 barrel 390, 4 speed, 205 t-case, 33's on aluminum slots. It runs well and drives, but the rear pinion is a little loose. I tightened it up, but it looks like the bearings are worn and it would need more time and energy than I really want to put into it.
It has rust in the cab corners, the a-pillars, and a little in the driver's floor (but it is structurally sound). The doors and the driver's side fender have the typical rust as well. I have the lower half of a rust-free cab (was rolled), two rust free doors and a rust free driver's fender available. The windshield has a crack, but I have a replacement for that too. It is missing the front driveshaft.
I have a bunch of other parts too...a 76 F150 4x4 parts truck with another 390, C6 and married 203, Edelbrock Streetmaster intake, finned valve covers, and other misc parts. Also a complete 79 F150 4x4 chassis.
I'm looking to get about $1500 for the truck itself, and am willing to wheel and deal on a package if you want to fix it up or swap the body onto a half ton frame. I'm also open to trades or parting it out, but the major items would need to go first. I have a truck & trailer and can deliver.
Here is my CL ad: 1973 Ford F250 4x4 sell trade
I'm in Oak Harbor on Whidbey Island. Call or text me if you want any more info.
Ivan
#263
Long time looker first time poster.
I could really use some of the stock 4" lift blocks, U-bolts and spring plates for a 80-97 F350 4wd. Hoping someone that did a lift might have some laying around. I'm in the Seattle Area.
I could really use some of the stock 4" lift blocks, U-bolts and spring plates for a 80-97 F350 4wd. Hoping someone that did a lift might have some laying around. I'm in the Seattle Area.
#264
Not sure if this will even work.
They are almost new. They were removed do to pinion angle problems.
I have a set of 5" blocks for the F250~F350 4X4 2006. Not sure on the
cut off dates for fitment They are tapered.
Price I am not sure on I paid about $160 for them
Sean
They are almost new. They were removed do to pinion angle problems.
I have a set of 5" blocks for the F250~F350 4X4 2006. Not sure on the
cut off dates for fitment They are tapered.
Price I am not sure on I paid about $160 for them
Sean
#265
I plan on coming to meet you guys on the 30th, are you coming? Maybe bring them with?
#266
I have the full kit and the box.
If you want me to I will bring it with me.
I may have to take it out of the box still got the 20 lb
lifting restriction do to my back.
Sean
If you want me to I will bring it with me.
I may have to take it out of the box still got the 20 lb
lifting restriction do to my back.
Sean
#268
Looking for one or two 10 inch subwoofers, 6.5 door speakers, a single din head unit (all of a quality brand such as Pioneer, Rockford Fosgate, Kicker, JL, JBL, Boston Acoustics, Lanzer, etc). Would prefer if the head unit has MP3 hookup.
Also still looking for a 8 or 10 foot flatbed (8 foot preferred) or a decent bed for a bricknose truck.
I have some parts off a 78 I scrapped:
-Front fenders. No scratches, dents, or rust. Blue in color
-Radiator support. For 351 radiator
-Round headlight buckets. I have all the hardware. Willing to sandblast them for additional fee
-Gauge cluster
I offer sandblasting services for small to medium sized parts. A rear gas tank out of one of these trucks is about the largest item I can do.
Also still looking for a 8 or 10 foot flatbed (8 foot preferred) or a decent bed for a bricknose truck.
I have some parts off a 78 I scrapped:
-Front fenders. No scratches, dents, or rust. Blue in color
-Radiator support. For 351 radiator
-Round headlight buckets. I have all the hardware. Willing to sandblast them for additional fee
-Gauge cluster
I offer sandblasting services for small to medium sized parts. A rear gas tank out of one of these trucks is about the largest item I can do.
#269
Hi Seattle/Washington Ford owners, I need 66 f250 radiator
I have my truck at Automotive inc and was wondering if anyone had a spare 1966 f250 camper spc radiator. Mine was rebuilt in the 70's and they say I need a new one.
Thank you.
Chris
206-799-7402
Thank you.
Chris
206-799-7402
#270
As some know, I will be getting new rims here shortly and would like to offer up my aluminum ones. They aren't in too good of shape and the lug holes are pretty beat up. When I get the new rims these are destine for the metal scrapping place. I might be able to get more cash if I sold them but I'm not sure.
They measure to 15 inches tall by 9 inches wide. I've been told it's quite a unique dimension. If someone had the ability to maybe rehone the lugholes or something to make them safer then they could be a good set. I don't know how much I could get in scrap $$ for them, I assume less than $50 so I will go for $100 for all 4 rims. That is OBO but I would like to get as much as possible. The current tires on them are 35's and they look pretty darn nice.
They measure to 15 inches tall by 9 inches wide. I've been told it's quite a unique dimension. If someone had the ability to maybe rehone the lugholes or something to make them safer then they could be a good set. I don't know how much I could get in scrap $$ for them, I assume less than $50 so I will go for $100 for all 4 rims. That is OBO but I would like to get as much as possible. The current tires on them are 35's and they look pretty darn nice.