post pics of your rig
#1
post pics of your rig
i couldnt find the thread where everyone is posting their pics of their truck so i started a new one. im almost done with mine, fender flares new wheels and tires and then hopefully a built motor.
<a href="http://s466.photobucket.com/albums/rr21/guitarnik/?action=view¤t=11-12-08_1639.jpg" target="_blank"><img src="http://i466.photobucket.com/albums/rr21/guitarnik/11-12-08_1639.jpg" border="0" alt="Photobucket"></a>
<a href="http://s466.photobucket.com/albums/rr21/guitarnik/?action=view¤t=11-12-08_1639.jpg" target="_blank"><img src="http://i466.photobucket.com/albums/rr21/guitarnik/11-12-08_1639.jpg" border="0" alt="Photobucket"></a>
#2
#6
YouTube - Cammed out 5.0 mud truck open headers link to the truck cammin
Adv. Duration: 300 intake/ 310 exhaust
Duration @ .050: 224 intake and 234 exhaust
Valve lift: .496 intake and .520 exhaust
Lobe C/L: 112
Flowtech Long Tube Headers
Ported E7 heads
Air Gap Intake manifold
Holley 570 Street Dominator w/ jet extentions
Pro Billet HEI Dissy with a Mallory Coil
Ford Motorsport Plug Wires
Mallory Fuel Pressure Bypass Regulator
All Fuel Lines are Stainless Steel Braided
AOD Trans
10in. Converter (3500 Flash Stall)
Shiftkit, Adjusted TV Cable for High Line Pressure
Rear: 8.8
Detroit Locker
3.73s
Front: Dana 44 TTB
Detroit Locker
SuperWinch Manual Hubs
3.73s
Suspention
Heavy Duty Rear Leaf Springs
Coil Spacers In Front
ProComp Shocks All around
33in BFG All-Terrains
Adv. Duration: 300 intake/ 310 exhaust
Duration @ .050: 224 intake and 234 exhaust
Valve lift: .496 intake and .520 exhaust
Lobe C/L: 112
Flowtech Long Tube Headers
Ported E7 heads
Air Gap Intake manifold
Holley 570 Street Dominator w/ jet extentions
Pro Billet HEI Dissy with a Mallory Coil
Ford Motorsport Plug Wires
Mallory Fuel Pressure Bypass Regulator
All Fuel Lines are Stainless Steel Braided
AOD Trans
10in. Converter (3500 Flash Stall)
Shiftkit, Adjusted TV Cable for High Line Pressure
Rear: 8.8
Detroit Locker
3.73s
Front: Dana 44 TTB
Detroit Locker
SuperWinch Manual Hubs
3.73s
Suspention
Heavy Duty Rear Leaf Springs
Coil Spacers In Front
ProComp Shocks All around
33in BFG All-Terrains
#7
Trending Topics
#13
stangbanger, i have a 2" AAL kit in front. i think the reart end is just the factory heavy duty blocks(they have ford stamped on them) with stock overloads springs. the guy before me didnt have a clue what was on it. so im just goin off what i see. the tires are 33x12.5r16.5 cooper tires. thanks stang for the compliment, im thinkin of gettin some aluminum modular wheels. Rebel you have a good lookin truck, UTf thats a tuff lookin truck.
#15